Essays about: "thesis on ansys"
Showing result 6 - 10 of 124 essays containing the words thesis on ansys.
-
6. CFD investigation of a unit cell inside a Plate Heat Exchanger
University essay from Lunds universitet/Institutionen för energivetenskaperAbstract : A numerical investigation of the unit cell approach has been done to reduce the computational cost for CFD (Computational Fluid Dynamics) of plate heat exchangers (PHE) at Alfa Laval. The reduced cost would enable LES (Large Eddy Simulation) to be done which would give a more detailed and accurate insight into the flow and heat transfer processes of the PHE. READ MORE
-
7. Pilot Study: Test Rig for Self-lubricating Kaplan Runner Bearings
University essay from KTH/Skolan för industriell teknik och management (ITM)Abstract : Hydropower has a relatively small impact on the climate and contributes to almost half of Sweden’s electricity production. Vattenfall own and operate roughly 125 large scale hydro power units of which about half utilizes a Kaplan turbine. READ MORE
-
8. Thermal environment and design considerations of the Foresail-2 satellite mission
University essay from Luleå tekniska universitet/RymdteknikAbstract : The thermal design of small satellite missions is critical for ensuring the performance and longevity of onboard instruments. This thesis focuses on the thermal design of Foresail-2, a 6U CubeSat mission to Geostationary Transfer Orbit (GTO), specifically addressing the thermal challenges associated with the magnetometer located at the end of a long boom featured on the satellite. READ MORE
-
9. Thermo-mechanical vibration technique for degating of high-pressure die casting component – A numerical study
University essay from Jönköping University/JTH, Material och tillverkningAbstract : The purpose of the thesis work given is to gain a better understanding of the degating process in high-pressure die casting components, as well as the effectiveness of the thermo-mechanical vibration technique for detaching cast components from the gating system. In addition, to evaluate and establish the most appropriate degating procedure in order to reduce labor, material costs, and processing time. READ MORE
-
10. Study and optimization of a hexacopter's composite structure
University essay from KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanikAbstract : Nowadays, the forestry industry still uses heavy machinery damaging both the forest and the soil. The start-up AirForestry is currently developing a sustainable way to thin and harvest trees. With their 6.2m wide electric drone carrying a harvesting tool, they can reach, thin, cut and carry trees without the need for access roads. READ MORE
