Essays about: "thesis on gearbox"

Showing result 1 - 5 of 65 essays containing the words thesis on gearbox.

  1. 1. Test Rig Development for Real Time Clamping Force Estimation in Threaded Tightenings with Implemented Extended Kalman Filtering

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Annie Farell; [2023]
    Keywords : Clamping force; Threaded Fastener; Extended Kalman Filtering; Test Rig Development; Real Time Estimation; Sensor Placement.; Klämkraft; gängad fästelement; utökad Kalman filtrering; testrigsutveckling; estimering i realtid; sensorplacering.;

    Abstract : The clamping force between the components during bolt tightening is of great interest, and it has been the focus of developing new tightening techniques for a long time. Today there is no easy or practical method to directly measure the clamping force in a typical production situation. READ MORE

  3. 2. Controller Design for a Gearbox Oil ConditioningTestbed Through Data-Driven Modeling

    University essay from KTH/Maskinkonstruktion (Inst.)

    Author : Charles Brinkley IV; Chieh-Ju Wu; [2022]
    Keywords : Gearbox; oil conditioning system; system identification; data-driven modeling; pole placement; PID; Växellåda; oljekonditioneringssystem; systemidentifiering; datadriven modellering; polplacerings; PID;

    Abstract : With the exponential development of more sustainable automotive powertrains, new gearbox technologies must also be created and tested extensively. Scania employs dynamometer testbeds to conduct such tests, but this plethora of new and rapidly developed gearboxes pose many problems for testbed technicians. READ MORE

  4. 3. NVH analysis and optimization of electric powertrain

    University essay from KTH/Maskinkonstruktion (Inst.)

    Author : Anujit Dafle; [2022]
    Keywords : Electric powertrain; Gear whine; Noise Vibration Harshness NVH ; Elektrisk drivlina; kuggvin; buller och vibrationer;

    Abstract : With increasing focus on electromobility many companies are developing vehicles powered by an electric energy source. Previously, engines used to be the most prominent source of noise in a traditional Internal Combustion Engine (ICE) vehicle. READ MORE

  5. 4. Conceptual design of an electronic dockingstation and positioner for portable antenna

    University essay from KTH/Maskinkonstruktion (Inst.)

    Author : Otto Egeman; Karl Westling; [2022]
    Keywords : Antenna; Automatic positioner; Geostationary; Docking station; Antenn; Automatisk inpekning; Geostationär; Dockningsstation;

    Abstract : The presented work in this report is a master’s thesis at the machine design track at KTH Royal Institute of Technology. The work was commissioned by Ovzon through Svea Teknik AB. The T6 antenna in Ovzons antenna terminal portfolio is as of now fully manual in terms of positioning against satellites. READ MORE

  6. 5. Gearbox fault detection, based on Machine Learning of multiple sensors

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Armands Krumins; [2021]
    Keywords : condition monitoring; gear; machine learning; surface fatigue;

    Abstract : The increasing demand for higher efficiency and lower environmental impact of transmissions, used in automotive and wind energy industries has created a need for more advanced technical solutions to fulfil those requirements. Condition monitoring plays an important role in the transmission life cycle, saving resources and time. READ MORE