Evaluation of biosand filter as a water treatment method in Ghana : An experimental study under local conditions in Ghana

Abstract: The availability to clean drinking water is something a lot of people take for granted today. Daily, there are about 1.8 billion people around the world that drinks water from a contaminated water source. Unfortunately, the deficiency is a fact, and about 361 000 children under the age of five die each year because of diarrheal disease (WHO, 2016a).  Earlier studies show that a biosand filter is an easy and efficient water purification method that cleans the water both physically, biologically and chemically. A biosand filter is often built using local material and is filled with sand, which makes the construction cheap and easy to repair is needed. Earlier studies have shown that this purification method can reduce waterborne disease by 99,9% with the help of a biofilm layer which develop in the top layer of the sand if the conditions are meet (CAWST, 2009). The purpose with this study was to build and evaluate a biosand filter as a water treatment method in Ghana. In total, three biosand filters was built with local material, each with different sand heights. The evaluation was done by studying the waters physical, biological and chemical properties before and after the filtration, which then was compared to the water quality standards from the World Health Organization (WHO) and Sweden. The results show that none of the three filters could produce water which met the standards for drinking water, which might be caused by the high flow of water through the filter which prevented the biofilm to grow. With the help from the results in Ghana, a new design of a water filter has been made to reduce the flow of water through the filter. Which gave a new biosand filter design with a diameter of 42 cm that, sand height of 80 cm and gravel height of 15 cm.