Mild impact wear in a concrete mixer : An evaluation of wet abrasive wear

Abstract: The concrete mixer industry is affected by abrasive wear under both dry and wet conditions. An upgrade of the material inside the drums to high abrasion resistant steel grades can improve the lifetime and offer the possibility to reduce the weight of the drum. A new wear testing apparatus was designed to simulate the wear conditions in a concrete mixer truck with the aim to investigate the relative wear resistance for a number of steel grades. Three tests were performed under wet conditions using 16-25 mm crushed granite. The tests focused on the wear resistance under sliding and impact wear for 30 different steel grades. All of the steel grades were analyzed regarding hardness profile, microstructure and chemical composition prior to testing. Wear losses were investigated by weighing before, during and after testing. Hardness profile and SEM investigations were performed at Swerea Kimab on worn surface and cross-section after testing. Relationship between hardness and wear resistance was found over a certain hardness level. Higher hardness show better wear resistance for this type of application. The shape and degradation of abrasives were found to affect the wear rate.