Heliostat Design

Abstract: A heliostat is a motorized mirror used in a Solar Power Tower plant. The technology has been around since the 1970’s, and involves hundreds or thousands of heliostats reflecting the sun’s rays to the top of a high tower, where the incident solar energy is converted to heat energy, which in turn is used to drive steam turbines and produce electricity. Demonstration plants have been built in the U.S.A. and Spain, and a number of new facilities have been added since 2005. To achieve a commercial breakthrough, the technology must be made more efficient so that electricity can be produced at prices comparable with other options such as wind, photovoltaic, nuclear and coal. A critical component in the economics of the Solar Power Tower plant is the cost of the heliostat, which is estimated to account for approximately 50 % of the investment cost of the total plant. This report deals with the heliostat from a multifaceted perspective. Different design approaches are explained. First, mirror geometries, with manufacturing dimensions, for a rotation-symmetric paraboloid-shaped mirror-assembly are obtained for mirrors with different sizes with a Matlab code. Investigating wind loads are among the most important tasks in a heliostat development project, as large wind loads radically complicates the design work. A wind load calculation-method based on previous work by Sandia National Laboratories and finite element method (FEM) is used in this work to design heliostats to withstand expected wind loading. The design of the geometry and the structure to withstand wind loading is illustrated with two azimuth elevation heliostats (25 m 2 and 49 m2). Finally, a number of innovative technical solutions are suggested. These are a new mirror facet mounting technique, sliding bearings, elevation drive, and a very unique azimuth motor module, which uses steel wires as belts with an integrated brake. It is hoped that the results and designs presented in this thesis will be a good foundation for further research in the heliostat structures and heliostat controls at the Robotics lab in IISc and elsewhere. Keywords: Solar Power, Heliostat, Thermal solar power, Solar Power Tower, Central Receiver System