Essays about: "316L"

Showing result 16 - 20 of 42 essays containing the word 316L.

  1. 16. Corrosion Resistant Multi-Component Coatings for Hydrogen Fuel Cells

    University essay from Linköpings universitet/Tunnfilmsfysik

    Author : Jakob Steneteg; [2021]
    Keywords : Coatings; Hydrogen Fuel Cells; Multi-Component; High Entropy Alloys; Corrosion Resistance;

    Abstract : Multi-component coatings and high entropy alloys have in recent years attracted great interest for research, since they have shown to exhibit properties greater than the com- ponents of their parts. Today’s climate challenges requires transitioning from fossil fuels to renewable energy sources which demands use of new technology and new innovations. READ MORE

  3. 17. Cooling Strategy Influence on Temperature in ETD Center

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Oskar Edinger; [2021]
    Keywords : Machining; Drilling; Exchangeable tip drill; 316L Stainless steel; Thermocouple; IR Thermography; Skärande bearbetning; Borrning; Löstoppsborr; 316L Rostfritt stål; Termoelement; IR Termografi;

    Abstract : Striving for increased productivity while maintaining hole quality and high process robustness when drilling requires knowledge about the working principles of heat generation, mechanics and a proper cutting fluid that aids in cooling, lubricating and evacuating chips from the cutting zone. If the heat generated in the tool-workpiece and tool-chip interfaces does not exit the cutting zone adequately through the chips, the workpiece material or the redistribution of coolant the hole quality can be impacted negatively and breakdowns may occur which reduces overall productivity. READ MORE

  4. 18. Optimization of laser powder bed fusion process parameters for 316L stainless steel

    University essay from Uppsala universitet/Oorganisk kemi

    Author : William Hahne; [2021]
    Keywords : Additive manufacturing; Stainless steel; 316L; Laser powder bed fusion; Powder bed fusion; Build rate; Powder layer thickness;

    Abstract : The interest for additive manufacturing techniques have in recent years increased considerably because of their association to good printing resolution, unique design possibilities and microstructure. In this master project, 316L stainless steel was printed using metal laser powder bed fusion in an attempt to find process parameters which yield good productivity while maintaining as good material properties as possible. READ MORE

  5. 19. Corrosion studies on multicomponent TiZrNbTa thin films

    University essay from Uppsala universitet/Strukturkemi

    Author : Asker Jarlöv; [2020]
    Keywords : Corrosion resistance; Multicomponent thin-film; High entropy alloy; TiZrNbTa; Bipolar plates; Magnetron sputtering;

    Abstract : The goal of this work was to evaluate the electrochemical properties of TiZrNbTa thin films deposited by magnetron sputtering using an industrial physical vapor deposition system. Samples were deposited on both Si(001) and 316L stainless steel. READ MORE

  6. 20. Influence of hydrogen on mechanical properties, microstructure and fracture surface of stainless steel 316L and stainless steel 304

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Mustafa Adnan Tawfeeq Salman; [2020]
    Keywords : Hydrogen embrittlement; stainless steel; microstructure; hydrogen charging; slow and fast strain rate.; Väteförsprödning; rostfritt stål; mikrostruktur; väte laddning; långsam och snabb töjnings hastighet;

    Abstract : Since hydrogen is an alternative energy source and has both economic and environmental benefits, it has received more attention. To use hydrogen a certain condition must be met, safe pressurized containers which are often made of metal. The metal isrequired due to the high mechanical strength and reasonable cost. READ MORE