Essays about: "Metal removal efficiency"

Showing result 1 - 5 of 19 essays containing the words Metal removal efficiency.

1. 1. PLASTER CASTS AND CORROSION AN EXPERIMENTAL STUDY ON REMOVAL OF CORROSION PRODUCTS FROM PLASTER CASTS

   University essay from Göteborgs universitet/Institutionen för kulturvård

   Author : Gabriella Zimmerman; [2023-11-07]
   Keywords : plaster cast conservation; iron corrosion staining; xanthan gel; Arbocel®; latex cleaning; chelating agents;

   Abstract : Conservation of plaster casts is complex due to the nature of the material itself. Corrosion of armature and metal structural supports is one of the most common causes of damage in plaster casts and subsequent corrosion staining. READ MORE

3. 2. The Development and Testing of Low-Cost Heat Transfer Enhancements for Solar Dryers

   University essay from Lunds universitet/Institutionen för energivetenskaper

   Author : Hoda Mahmoodi; [2023]
   Keywords : Solar dryer; Bhutan; Drying rate; Solar absorber; Technology and Engineering;

   Abstract : In the mountainous regions of Bhutan and Nepal, post-harvest losses cause significant challenges for producers. Open air sun drying is usually used by farmers to preserve their produce. There are many disadvantages to this method. READ MORE

4. 3. Chip Management in Milling and Drilling of Ductile Cast Iron

   University essay from Lunds universitet/Industriell Produktion

   Author : Alexander Jönsson; Giacomo Aliboni; [2023]
   Keywords : Chip Carryover; Chip Management; Ductile Cast Iron; Chip Removal; Chip Asportation; Milling; Drilling; Technology and Engineering;

   Abstract : This paper presents a comprehensive cross-functional analysis of machining operations for ductile cast iron components in the automotive industry, focusing on the problem of chip carryover and its impact on downstream processes. The research aims to understand the role of machining and identify the source of the issue, by analyzing different machining sequences and the chips that affect the final product or subsequent production stages. READ MORE

5. 4. Removal Characteristics of Fibrous and Particulate Microplastics : A Study of the Effectiveness of Coagulation-Flocculation- Sedimentation

   University essay from Uppsala universitet/Institutionen för geovetenskaper

   Author : Amrith Kumar; [2022]
   Keywords : Coagulation; flocculation; jar test; microplastics; sedimentation; water treatment; Burktest; flockning; koagulering; mikroplaster; sedimentering; vattenrening;

   Abstract : The rapid proliferation of microplastics (MPs) over the last few decades have raised alarms about the major environmental and health impacts posed by this anthropogenic source. The widespread propagation and transport of MP particles in water sources have accelerated the need to study the eco- toxicological impacts as well as the efficacy of various removal mechanisms from these critical water sources. READ MORE

6. 5. Evaluation of pollutant removal performance of stormwater biofilters in a Swedish climate : Comparison of three different filter media designs

   University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

   Author : Anna Träff; [2022]
   Keywords : Stormwater biofilter; stormwater treatment; cold climate; filter media design; low impact development;

   Abstract : In the recent century, a process of urbanization has increased globally. Previously rural or natural land have been converted into impervious surfaces to make way for housing, industries, and roads. This anthropogenic process has resulted in an increased amount of surface runoff from precipitation, so-called stormwater. READ MORE