Essays about: "thesis tensile"

Showing result 1 - 5 of 220 essays containing the words thesis tensile.

  1. 1. A PILOT STUDY ON STAIN REDUCTION Effects of Stains, Cleaning Agents, and Cleaning Methods on Polyester Textiles

    University essay from Göteborgs universitet/Institutionen för kulturvård

    Author : Karin Hindborg; [2023-08-28]
    Keywords : colour measurements; spot cleaning; suction table; tensile testing; textile con-servation;

    Abstract : The thesis was an experimental pilot study that investigated efficiency and effects of stains and cleaning agents on polyester textiles. A literature review and interviews with textile conservators were used to understand the degradation of polyester fibres and to find suit-able staining and cleaning agents to use in the experiments of the study. READ MORE

  3. 2. Thermal Conversion of Cellulose-Lignin Precursors into Carbon Fibres

    University essay from Uppsala universitet/Nanoteknologi och funktionella material

    Author : Sofia Westberg; [2023]
    Keywords : Carbon fiber; lignin; cellulose; continuous conversion;

    Abstract : Carbon fibres are used in many applications thanks to their exceptional tensile properties in relation to their relatively low weight. These thin strands of at least 90% carbon are mixed with a matrix such as epoxy to form composites used for cars, wind turbines, prosthetics, and many other things. READ MORE

  4. 3. PARAMETRIC STUDY FOR WALL-TO-WALL CONNECTION IN MIXED STEEL CONCRETE STRUCTURES

    University essay from KTH/Bro- och stålbyggnad

    Author : Simone De Troia; [2023]
    Keywords : ;

    Abstract : The objective of this thesis work is to study the connection between two Steel Concrete Structures (SCS) wall modules using embedded connection bars. The SCSs under investigation consist of two steel faceplates held together by tie bars, concrete is cast inside, and stress transmission between the concrete and the steel plates is provided by shear connectors as headed studs. READ MORE

  5. 4. Visualization, modeling and consequences of residual stresses in glass frit sealing of a UV light source

    University essay from Uppsala universitet/Mikrosystemteknik

    Author : Vilma Hurtigh Grabe; [2023]
    Keywords : bonding; micro system; glass frit; sealing; finite element; modeling; glass; mikrosystem; sammanfogning; glasfog; fog; finita element; modellering; glas;

    Abstract : PureFize Technologies AB develops and manufactures a broadband ultraviolet (UVC) light technology device that is mercury-free and based on nanotechnology, using the principle of field emission. The light source is made of Ti and glass, which are hermetically bonded, using a low-temperature glass frit, at elevated temperatures. READ MORE

  6. 5. Validation of Finite Element Model of a Tetra Pak Package

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Warsame Mohamed Ali; Abdullahi Abdi Hashi; [2023]
    Keywords : Abaqus; HDPE; Package testing; Validation; Abaqus; HDPE; Pakettestning; Validering;

    Abstract : There is a high dependency on accurate finite element models in the packaging industry for concept selection, design and virtual validation of packages. One of themost used materials for these packages is High-Density Polyethylene (HDPE). Thismaterial is highly anisotropic, strain rate dependent and has different behavior intension and compression. READ MORE