Design of auxiliary communication for audio between computers and DSPs : Programming and optimization of computational resources

Abstract: This thesis report is about designing a prototype and establishing audio communication between a computer and Digital Signal Processor (DSP) using two preamp circuits using both auxiliary and USB connection. The paper gives the reader an overview on how audio is transmitted from a computer, through the system and to the desired output. The reader should also get a better understanding of how an AD-converter samples the incoming signal to the Discrete plane and how an AUX or phone connector works. This information can be used for designing preamp circuits to communicate between a computer and the DSP. The DSP circuit uses an STM32 processor to control the incoming and outgoing signals with the use of ADC and DAC conversion. The DSP also uses microphones to capture surrounding sound. An addition is to make a prototype on how to use these microphones to  send the signal upstream to the computer. The microphone is then benchmarked with the use of Matlab, calculating Total Harmonic Distortion. Management and optimization of code structure and resources is done in the source files of the project. Using imperative C programing, large functions are broken down into smaller functions to ease readability and control flow. The result is a prototype circuit that can communicate audio signals with both audio jack and USB between computers input and output to the DSP. Using CubeMX in conjunction with CubeIDE to add additional ADC channels to be able to incorporate an automatic source control when the audio jack or USB is connected.