Essays about: "Cemented Carbide Tools"

Showing result 1 - 5 of 27 essays containing the words Cemented Carbide Tools.

1. 1. Investigation of the Microstructure of Plastically Deformed Cemented Carbide

   University essay from KTH/Materialvetenskap

   Author : Felicia Larsson; [2023]
   Keywords : ;

   Abstract : During machining operation, cemented carbide tools are exposed to high loads and temperatures, which eventually leads to plastic deformation of the tool material. The aim of this work was to investigate if the microstructures of creep deformed micro grain cemented carbides can be linked to alloying elements and mechanical properties. READ MORE

3. 2. Study of Porosity in Uncoated Cemented Carbide Tools During Titanium Alloy Machining.

   University essay from Lunds universitet/Industriell Produktion

   Author : Cornelis Botermans; [2023]
   Keywords : Technology and Engineering;

   Abstract : During high speed machining of titanium alloys both the tool and workpiece material diffuse into one another affecting the surface integrity of the cutting tool edge and leading to fracture. One proposed mechanism by which the tool integrity is compromised results from the possible formation of porosity in to subsurface of the tool substrate close to the tool cutting edge. READ MORE

4. 3. Analysis of granulated carbide powder and how it affects pressing

   University essay from KTH/Materialvetenskap

   Author : Maeva Anfossi; Emma Hjortzberg-Nordlund; Linnéa Lundemo Mattsson; [2023]
   Keywords : Cemented Carbide Tools; Pressing Agent; Flowability; Tap Density; Angle Of Repose; Hall Flow Time; Particle Size Distribution; Powder Rheometer; Compatibility; Hårdmetallverktyg; Pressmedel; Flytbarhet; Tapp Densitet; Rasvinkel; Hall Flödestid; Partikelstorleksfördelning; Pulverrheometri; Kompatibilitet;

   Abstract : During the pressing of powder mixtures to make cemented carbide tools, the degree to which the powder spreads to fill the die and to which it compacts is uncertain. This leads to inconsistent dimensions and densities in the finished product. READ MORE

5. 4. Evaluation of a novel method to investigate diffusion between copper-zinc alloys and cemented carbides

   University essay from Uppsala universitet/Tillämpad materialvetenskap

   Author : André Larsson; [2022]
   Keywords : Diffusion; Brass; Copper alloys; Copper zinc alloys; Wear; Cemented carbide; Diffusion couple;

   Abstract : When slow wear mechanisms are studied it is important to examine slower processes, such as diffusion. Such processes can have a significant impact over time and can cause other phases to form, which can have a large effect on the wear. READ MORE

6. 5. Evaluation of Refined Tribological Properties of Diamond Coated Cutting Tools Used in Machining of High-Strength Aluminum Alloys : Master thesis report regarding refined frictional & wear behavior of uncoated & CVD diamond coated WC-Co cemented carbide cutting tools used for machining of Al 7xxx alloys.

   University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

   Author : Christian Hultman; [2022]
   Keywords : tribology; machining; metal cutting; turning; milling; friction; wear; material transfer; surface technology; tribologi; skärande bearbetning; svarvning; fräsning; friktion; förslitning; nötning; materialöverföring; ytteknologi;

   Abstract : High strength aluminum alloys have for a long time been a popular material utilized in the automotive and aerospace sector due to coveted mechanical properties in terms of weight, strength, fatigue, and corrosion. However, tribological mechanisms such as tribo-film formation and material transfer during the metal cutting manufacturing process of aluminum impose significant reduction of machining and tool-life performance. READ MORE