Essays about: "FEM-simulering"
Showing result 1 - 5 of 6 essays containing the word FEM-simulering.
-
1. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms
University essay from KTH/HållfasthetsläraAbstract : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. READ MORE
-
2. Modelling and Simulation of Interior Permanent Magnet Synchronous Machine and, Design Optimization Towards Transmission
University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)Abstract : This report summarizes the thesis study carried out at Scania CV AB. The study presents design optimization of an interior permanent magnetic (IPM) synchronous machine. A parameterised Matlab tool was developed in order to serve the optimization routine. READ MORE
-
3. Dielectric Response and Partial Discharge Characteristics of Stator Winding Insulation System with SiC Stress Grading
University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)Abstract : The typical construction of a stator coil includes the use of end corona protection (ECP)coating, which is made of semi-conductive materials like silicon carbide (SiC). Thepurpose of ECP is to smooth the electric stress distribution near the slot exit, limitingthe electric field and partial discharge (PD) activity within the insulation system. READ MORE
-
4. An armored truck cab design : Case study: investigation of selected steel grades
University essay from KTH/MaterialvetenskapAbstract : This study aimed at defining useful guidelines for the design of an armored truck cab. Particularly, the quality and performance of ballistic steel were defined, considering not too high demanding requirements. Two steel grades, corresponding to hardness of 500 HB and 600 HB, and three different suppliers were selected. READ MORE
-
5. Electromagnetic modellin and testing of a Thomson coil based actuator
University essay from KTH/ElkraftteknikAbstract : The aim of the present thesis is to improve and optimize a Thomson coil based actuatorfor medium voltage vacuum interrupters. The Thomson coil based actuator’s concept isdiscussed. The thesis presents analytical as well as finite element models of the actuatoralong with a comparison of their results. READ MORE