Essays about: "Single-lap shear"

Showing result 1 - 5 of 7 essays containing the words Single-lap shear.

1. 1. Plastic deformation of hot riveted joints acting in shear

   University essay from KTH/Bro- och stålbyggnad

   Author : Victor Gard; [2023]
   Keywords : ;

   Abstract : A popular way to maintain old rivet connections is to reuse the old connection and replace the old rivets with high grade steel bolts. In doing so the behavior of the joint can change due to the new geometry, where a gap between the new bolt and the rivet hole emerges. READ MORE

3. 2. Numerical analysis of a bearing strength in delaminated composite joint

   University essay from KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanik

   Author : Olavi Kukkonen; [2023]
   Keywords : Bearing strength; Single-lap shear; Delamination; Countersinking; Hole size;

   Abstract : Composite structures are commonly joined using adhesive or mechanical joints, withmechanical joints being preferred when components need to be removable for maintenancepurposes. However, the presence of mechanical joints introduces a discontinuity in theload path, which can serve as an initiation point for failure and needs to be taken intoaccount in the design of the joint. READ MORE

4. 3. Composition and property study of adhesives based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

   University essay from KTH/Fiber- och polymerteknologi

   Author : Nathalie Johnsson; [2021]
   Keywords : Poly 3-hydroxybutyrate-co-3-hydroxyvalerate ; PHBV; Adhesive; Labels; Additives; Poly 3-hydroxybutyrate-co-3-hydroxyvalerate ; PHBV; Bindemedel; Etiketter; Additiv;

   Abstract : Lim klassificeras som ett ämne som kan hålla ihop två ytor så att de motstår separation. Dagens lim kan anpassas efter vilken applikation de ska användas till och kan ha ett stort antal olika egenskaper. De fysikaliska och kemiska egenskaperna av limmet är de viktigaste faktorerna för att bilda en bra limbindning. READ MORE

5. 4. Evaluation of the mechanical properties of structural adhesives cured under different environmental conditions

   University essay from Högskolan i Borås/Akademin för textil, teknik och ekonomi

   Author : Sebastian Wilhelmsson; Joel Ågren; [2021]
   Keywords : structural adhesive; methyl methacrylate; curing; temperature; water; tensile testing; DSC;

   Abstract : Today, structural adhesives are found extensively in load-bearing engineering applications, as their use can be advantageous compared to other fastening methods. However, the characteristics of adhesives are far more complex, making it challenging to predict their behavior in different service conditions. READ MORE

6. 5. Numerical Assessment of Defects Effect on Boltless Composites Longitudinal Joints

   University essay from KTH/Lättkonstruktioner

   Author : Mara Santaniello; [2020]
   Keywords : ;

   Abstract : The work presented in this thesis focuses on the numerical assessment of defects effect on potential boltless design for fuselage panels longitudinal joints, typically identified as High Load Transfer (HLT) configuration. Nowadays, the state-of-art joining technique for primary aircraft composite structures, such as fuselage barrels, is still mechanical fastening. READ MORE