Essays about: "Ti-6AL-4V"

Showing result 16 - 20 of 21 essays containing the word Ti-6AL-4V.

  1. 16. Tool wear in turning of titanium alloy Ti–6Al–4V : Challenges and potential solutions for crater wear, diffusion and chip formation

    University essay from Uppsala universitet/Tillämpad materialvetenskap

    Author : Erik Bamford; [2016]
    Keywords : Wear; Titanium; Ti6Al4V; Diffusion; Crater Wear; Chip Formation; Shear Strain; Cracks; Turning; Cutting Tools; Cemented Carbide; TiCN; Coating; Sandvik; Coromant;

    Abstract : Titanium alloys are major materials used in the airplane industry, and prospects show that airplane production will double in the next 20 years. Consequently, the demand for cutting tools for machining of titanium alloys will increase. The primary problem when machining titanium alloys is their low thermal conductivity. READ MORE

  3. 17. Titanium alloys Mechanical properties and microstructure transformation

    University essay from Lunds universitet/Fysiska institutionen

    Author : Martin Olsson; [2016]
    Keywords : Physics and Astronomy;

    Abstract : Abstract The aim of the project is to determine the mechanical properties and the microstructure with a to b transformation of the titanium alloy Ti-6Al-4V. The experiments made were tensile tests at temperatures 20, 400 and 800C and SEM images before and after inductive methods. READ MORE

  4. 18. Material selection for an aerospace component

    University essay from KTH/Lättkonstruktioner

    Author : Gustav Jönsson; [2015]
    Keywords : ;

    Abstract : In the world of today there is a drive for lighter and more effective products for various reasons e.g. reduced environmental impact, higher payload, fuel efficiency etc. There is also an expanding development of new materials for a large number of different applications. READ MORE

  5. 19. Tool wear in turning titanium alloys

    University essay from Uppsala universitet/Institutionen för kemi - Ångström

    Author : Magnus Johansson; [2015]
    Keywords : Titanium machining; Tool wear; Crater wear; Turning; WC Co cutting tool;

    Abstract : In this master thesis, performed at AB Sandvik Coromant, wear and tool life of uncoated WC/Co grades have been investigated during longitudinal turning of the titanium alloy Ti-6Al-4V. Due to titanium’s poor thermal conductivity and high chemical reactivity towards most metals, high temperature is achieved between the tool and workpiece material, resulting in high tool wear rates. READ MORE

  6. 20. 3D Characterization of Ti-6AL-4V using the TriBeam System

    University essay from KTH/Materialvetenskap

    Author : Marcus Johnson; [2013]
    Keywords : Ti-6AL-4V; TriBeam;

    Abstract : hree-­‐dimensional characterization of fully equiaxed Ti-­‐6Al-­‐4V has been performed using the recently developed TriBeam system. To date, no general model for full prediction of Ti-­‐6Al-­‐4V tensile properties as a function of empirical microstructural parameters exist. READ MORE