Essays about: "cross-section depth"

Showing result 1 - 5 of 18 essays containing the words cross-section depth.

  1. 1. Thermal management system for lithium-ion batteries

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Kevin Wang; Jonathan Ripheden; [2022]
    Keywords : ;

    Abstract : Då världen nu håller på att ställas om från fordon med förbränningsmotorer till elektriska motorer, sätts nya krav på teknologin som används. Batterierna som används utsätts för påfrestningar som inte tidigare funnits, vilket medför nya problem som kräver nya lösningar. READ MORE

  3. 2. Transverse force absorption in column base mounts for steel columns : Screw joints in column bases

    University essay from KTH/Byggteknik och design

    Author : Dejan Jovanovic; Ruslan Khalilov; [2021]
    Keywords : column bases; transverse force absorption; tightening moment; clamping force; non-prestressed joints; Pelarfötter; tvärkraftskapacitet; åtdragningsmoment; spännkraft; icke förspända förband;

    Abstract : It is common to use different construction materials in combination such as concrete, steel, wood and glass in order to optimize buildings. The purpose of this is to reduce weight and increase load capacity, but it also facilitates assembly and reduces construction time. READ MORE

  4. 3. Characterization of phases in Argon Oxygen Decarburization slag

    University essay from KTH/Materialvetenskap

    Author : Emil Rosqvist; Theodore Vassi; [2021]
    Keywords : ;

    Abstract : Slag is an important part of steelmaking with the AOD (Argon Oxygen Decarburization) process. In this work the focus was on developing a methodology for characterizing phases in slagsamples obtained after decarburization, reduction and desulphurization. READ MORE

  5. 4. Determining the Influence of the Type of Shielding Gas during Additive Manufacturing of an Aluminum Alloy by Monitoring the Process Qualitatively and Analyzing Process Byproducts Quantitatively

    University essay from KTH/Materialvetenskap

    Author : Stefanie Desiree Kleemeyer; [2021]
    Keywords : additive manufacturing; PBF-LB M; aluminum; shielding gas; argon; nitrogen; helium; carbon dioxide;

    Abstract : This thesis analyzes the influence of process gases on the formation and the characteristics of process byproducts that emerge during additive manufacturing of an aluminum alloy belonging to the 2000 series.  In order to address the influence, four pure gases, argon, nitrogen, helium, and carbon dioxide, were used as a shielding gas on the same parameter sets. READ MORE

  6. 5. Geomorphology alteration effects over Kävlinge River Basin

    University essay from Lunds universitet/Avdelningen för Teknisk vattenresurslära

    Author : Erik Frias Olguin; [2020]
    Keywords : Kävlingeån; DEM; Flooding; Geomorphology; model; MIKE HYDRO; Technology and Engineering;

    Abstract : This thesis focuses on the case study over the Kävlinge catchment located in the south of Sweden, and mainly in the Kävlinge river. This river, which is the mainstream of the catchment, has been subject to modifications due to agricultural activities. READ MORE