Essays about: "thesis in cost"

Showing result 1 - 5 of 4611 essays containing the words thesis in cost.

  1. 1. Virtual Test Cell : a Real-Time digital twin of an internal combustion engine

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Rasmus Malmqvist; [2024]
    Keywords : Virtual Test cell; Digital twin; Software in the loop; Real-time;

    Abstract : As the world is evolving faster and technology gets cheaper and more powerful, simulations are proving to be more and more beneficial. Simulations allow for faster development with less lead time between iterations which means that product versions can be released more often and at less cost. READ MORE

  3. 2. Process parameter optimisation for Waspaloy using Laser-Directed Energy Deposition with Powder

    University essay from Högskolan Väst/Institutionen för ingenjörsvetenskap

    Author : Johannes Lövhall; [2024]
    Keywords : Process parameter optimisation; Waspaloy; Laser-Directed Energy Deposition with Powder;

    Abstract : Material utilisation is of importance in the manufacturing industry formaking the most of each material, minimising waste and increasing cost-effectiveness. In this thesis, samples of Waspaloy built with the method of L-DED-P has been analysed in order to investigate how process pa-rameters influence the build quality and geometrical accuracy in as-builtobjects. READ MORE

  4. 3. Optical Communication using Nanowires and Molecular Memory Systems

    University essay from Lunds universitet/Fysiska institutionen; Lunds universitet/Synkrotronljusfysik

    Author : Thomas Kjellberg Jensen; [2024]
    Keywords : neuromorphic computing; nanowire; molecular dye; DASA photoswitch; OBIC; Physics and Astronomy;

    Abstract : Neuromorphic computational networks, inspired by biological neural networks, provide a possible way of lowering computational energy cost, while at the same time allowing for much more sophisticated devices capable of real-time inferences and learning. Since simulating artificial neural networks on conventional computers is particularly inefficient, the development of neuromorphic devices is strongly motivated as the reliance on AI-models increases. READ MORE

  5. 4. Potential and Limitations of the Sketch Map Tool in the International Red Cross Red Crescent Movement

    University essay from Lunds universitet/Avdelningen för Riskhantering och Samhällssäkerhet

    Author : Kimon Letzner; [2024]
    Keywords : Disaster risk reduction; Participatory action research; Community risk mapping; International Red Cross Red Crescent Movement; Colombia; Technology and Engineering;

    Abstract : In disaster risk management, participatory mapping (PM) closes spatial data gaps in communities by integrating local risk knowledge. The thesis examined the potential and limitations of the Sketch Map Tool (SMT) as a PM tool for community-based disaster risk reduction (DRR) through an International Red Cross Red Crescent Movement case study. READ MORE

  6. 5. Techno-Economic Analysis of Dye Separation in Textile Recycling

    University essay from Lunds universitet/Avdelningen för Teknisk vattenresurslära

    Author : David Lundberg; [2024]
    Keywords : Dye; Membrane filtration; Electrocoagulation; Techno-economic analysis; Pre-feasibility study; Technology and Engineering;

    Abstract : This study determines the technical and economic feasibility of separating dye from a process filtrate in industrial textile recycling using electrocoagulation or sequences of membrane filtration with microfiltration, ultrafiltration, nanofiltration and reverse osmosis. The lower requirements for treating this stream, compared to previously researched dyehouse effluents, left treatments not good enough for dyehouses viable for this process filtrate. READ MORE