Projection Nut Welding to High- and Ultra-high Strength Steels

Abstract: In an effort to increase the fuel efficiency of cars more widespread use of higher strength steels is seen for their high strength-to-weight ratio. Thesesteels are more limited in their formability and tendency to harden than conventional steels, complicating manufacturing. This thesis summarizes the available research on resistance projection nut welding to higher strength steels and investigates the accuracy of the simulation program SORPAS when simulating projection nut welds to AlSi-coated Boron steel. It was found that the greatest difficulties in welding coated ultra high strength steels were the metallurgical effects of both the high alloying content of the steel and the coatings interacting with the weld when melting. Although SORPAS was an intuitive program to use for resistance welding and had a wide library of materials available, it was not found to be able to predict the resistance characteristics or results of projection nut welds to coated Boron steel without significant changes to default material parameters. The biggest issue was the delaying effect the coating layer had on the peak resistance, something not observed experimentally. Better results are suggested to be possible after experimentally ensuring the properties of the materials used and importing those values into SORPAS.