Essays about: "sealing concepts"

Showing result 1 - 5 of 18 essays containing the words sealing concepts.

  1. 1. Water Protected Battery Door Sealing Concepts for Repairability of Handheld Devices

    University essay from Lunds universitet/Innovation

    Author : Maria Bark; Siri Wetterstrand; [2024]
    Keywords : Technology and Engineering;

    Abstract : .... READ MORE

  3. 2. Electric alternative of hydraulic operation : Empowering safety through electrification

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Edvin Turesson; [2023]
    Keywords : Hydraulic; electrification;

    Abstract : Electrification is a relevant subject in the industrial market and provides many benefits. The motivation for this project is to reduce the fire hazard by removing the hydraulic fluids from the steel mill environment. This project aims to analyze the existing hydraulic sealing unit and evaluate the electrification alternatives. READ MORE

  4. 3. Design of a Cable Sealing Solution

    University essay from Lunds universitet/Innovation

    Author : Axel Wiktor; Oliver Dropuljic; [2022]
    Keywords : Cable gasket; grommet; prototyping; additive manufacturing; IP67-testing; design of experiments; material evaluation; silicone rubber.; Technology and Engineering;

    Abstract : To seal a cable going into the chassis of a camera, a cable gasket is placed between the chassis and the gasket. This type of gasket is called a grommet. For this project, these grommets needed to be able to withstand a modular plug being pulled through and at the same time be as small as possible to fit into a small space. READ MORE

  5. 4. Design of Nose-cone for Autonomous Underwater Vehicle

    University essay from Lunds universitet/Innovation

    Author : Anna Arnwald; [2021]
    Keywords : AUV; AM; 3D printing; product development; DfAM; Technology and Engineering;

    Abstract : The goal was to perform a feasibility study on an additive manufactured thermoplastic nose-cone hull design for an autonomous underwater vehicle SAM. Where feasibility includes the technical, economic and sustainable aspect in the analysis. READ MORE

  6. 5. Standard vs. revolutionary sealing: : An investigative thesis on two methods of conceptual designing with regards to the root causes of failure mode in raw mill 7.

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Karim Abou El Alamien; [2020]
    Keywords : Failure mode; Mechanical seal; Tribology; Raw mill; Cement; Lagerhaveri; Mekanisk tätning; Tribologi; Råkvarn; Cement;

    Abstract : The grinding rollers of raw mill 7 operate in very harsh conditions and, because of this, suffer from excessive failure mode due to lip seal deterioration. Foreign material penetrates the deteriorated lip seal and enters the bearings resulting in bearing failure. READ MORE