Essays about: "Microstructural characterization"
Showing result 1 - 5 of 16 essays containing the words Microstructural characterization.
-
1. Microstructural characterization of quench annealed duplex SAF 2507 utilizing EBSD
University essay from Uppsala universitet/Tillämpad materialvetenskapAbstract : Producing large bars of duplex stainless steel free from precipitated embrittling phases isdifficult due to the many factors that influence precipitation. Research shows that intermetallicslike sigma and chi deteriorate principal material properties for the main application areas. READ MORE
-
2. Microstructural and Micro-Mechanical Characterization of As-built and Heat-treated samples of HASTELLOY X produced by Laser Powder Bed Fusion Process
University essay from Högskolan Dalarna/Institutionen för information och teknikAbstract : Microstructure and micro-mechanical characterization of as-built and heat-treated samples of Hastelloy X produced by laser powder bed fusion (LPBF) process has been carried out in this study. As-built LPBF blocks were solution heat-treated at 1177°C and 1220°C followed by fast cooling. READ MORE
-
3. Melt pool Geometry and Microstructure Characterization in Additively Manufactured WE43 Alloy
University essay from Uppsala universitet/Institutionen för materialvetenskapAbstract : Mg-RE based alloys have exhibited promising properties in application for biodegradable implants. This work provides a systematic study on the characterization of melt pool geometry and profile for one such alloy, WE43. READ MORE
-
4. Correlation Between Microstructural And Mechanical Properties In Niobium Carbide Reinforced Hadfield Steel Composites
University essay from Lunds universitet/Industriell ProduktionAbstract : Degradation of tools is a prevalent aspect in the mechanical world; due to the advancement of technologies and intense research and development, there are new ways and ideas to curb or delay the tool failures; one such idea is to implement Metal Matrix Composites (MMCs) with various reinforcement materials. This thesis focuses on improving the hardness and wear resistance of Hadfield steel by reinforcing it with Niobium Carbide (NbC). READ MORE
-
5. Characterization of as prepared and exposed Perovskitesolar cells by microscopic and spectroscopic techniques
University essay from Högskolan Dalarna/Institutionen för information och teknikAbstract : Studying the microstructural features, optical, and electrical properties of the thin-filmperovskite solar cells (PSC) is the main objective of this thesis work. All the PSCs used in thisthesis work were prepared by spin coating assisted with gas quenching process and the samplesreceived from Interuniversity Microelectronics Centre (IMEC), Belgium. READ MORE