Essays about: "load force"

Showing result 16 - 20 of 206 essays containing the words load force.

  1. 16. Improved Bridge Load Capacity via Dynamic Train-Track-Bridge Interaction : Assessing the dynamic amplification factor caused by measured track irregularities for rail freight transport

    University essay from KTH/Bro- och stålbyggnad

    Author : Muhannad Asaad; [2023]
    Keywords : ;

    Abstract : The carbon impact of transportation is large and requires sustainable solutions. With expected population growth, rail transportation plays a vital role in facilitating a greener Europe. The expansion of the rail infrastructure is therefore of essential importance for future challenges. READ MORE

  3. 17. Optimization of Material Cost and Carbon Footprint of Flat Reinforced Concrete Slabs with Simple Steel Piles : Designed according to Eurocode and Swedish appendix EKS

    University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Author : Oskar Lönn; [2023]
    Keywords : Optimization; RC slab; Material cost; API;

    Abstract : When designing reinforced concrete (RC) slabs with steel piles various variables must be considered, from the internal force to the distance of piles. An endless number of designs are possible, leaving space for optimizing designs. READ MORE

  4. 18. Evaluation of pretension losses in heated screw joint

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Joel Svensson; [2022]
    Keywords : screw joint; clamping force; thermal load;

    Abstract : The heated flow within the silencers of heavy transport vehicles can easily reach temperatures of hundreds of degrees Celsius. The thermal loads can cause problems for certain components on a silencer. READ MORE

  5. 19. Design of an Embedded Torque Sensor : Based on Volumetric Strain induced Differential Air Pressure

    University essay from Mittuniversitetet/Institutionen för elektronikkonstruktion

    Author : Wen Qi; [2022]
    Keywords : Torque; Electronics; Gas sealing; Pressure measurement;

    Abstract : This paper proposes a torque sensor based on the differential air pres- sure measurement method using a new embedded structure. The pro- posed sensor design is an improvement over the previous sensor design. The mechanical sensitivity, resolution, and stress distribution of the new sensor are analyzed by finite element modeling. READ MORE

  6. 20. Development of Unloading Station by Concept Generation and Ergonomic Evaluation

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Alex Kauppi; [2022]
    Keywords : Product development; Scania; Ergonomics in production; SES RAMP; Workers collective; Lean;

    Abstract : This thesis presents a product development project done at Scania Ferruform in Luleå. The process that was used is called Stage-Gating which means that the project is divided into gates. READ MORE