Evaluating the Performance of Propulsion System Elements in an Aerospace Company

Abstract: This paper examines two examples of testing activities of sub-components of a 300kN methalox first-stage rocket engine developed by Pangea Aerospace, namely, theinjectors and the cryogenic pumps. One of the difficulties of these test campaignsis to evaluate the performances of these sub-components without using cryogenicpropellants and in conditions differing from flight conditions.Two different methods were used to replace the cryogenic propellants at extreme pressures and temperatures: the pumps were tested using water to replace both propellants, and the injectors were tested using water and nitrogen to account for the different propellant phases. The correlation, similarity methods, and bench sizing were detailed for both test campaigns, but only the injector test campaign was completed and its results were analyzed.The method to emulate cryogenic fluid behavior in a pump leads to the use of a bench controlling not only pressure and mass flow but also temperature to account for the cavitation effects. Furthermore, the bench must have the capability to pressurize the water under atmospheric pressure, leading to the use of a vacuum pump. The injector test campaign produces results that closely align with theoretical predictions. This enables the selection of the optimal single-element injector design through a quantitative assessment of the discharge coefficient and a qualitative evaluation of the spray angle and atomization. Although these studies are based on strong models, they must be compared to hotfire data and later flight data to be assessed fully, all the more so that the pump test campaign was not performed.