Essays about: "EFFICIENCY RATIO"

Showing result 6 - 10 of 388 essays containing the words EFFICIENCY RATIO.

1. 6. IMPACT OF GREEN WALLS ON INDOOR AIR HUMIDITY

   University essay from Lunds universitet/Institutionen för arkitektur och byggd miljö; Lunds universitet/Avdelningen för Energi och byggnadsdesign

   Author : Sahit Trejo Montes; [2023]
   Keywords : Indoor-air humidity; green wall; low outdoor air temperature; ventilation system; environmental building design.; Technology and Engineering;

   Abstract : This thesis presents a case study of an indoor Green Wall (GW) installed in an office building in Malmö, Sweden. The study analyzed the effect of the GW on air humidity during low temperature and dry moisture outdoor conditions. READ MORE

3. 7. Improved Energy Benchmarking of Supermarkets Buildings

   University essay from KTH/Skolan för industriell teknik och management (ITM)

   Author : Sahar Shaghiasl; [2023]
   Keywords : ;

   Abstract : Amongst commercial spaces, supermarkets are the most energy intensive building and the presence of these building is expected to rise. Therefore, the study of energy efficiency and the impact of supermarket on environment is the important areas which needs a lot of research. READ MORE

4. 8. Evaluation of a computational method for natural fiber-reinforced plastics

   University essay from KTH/Hållfasthetslära

   Author : Anna Lim; [2023]
   Keywords : PPNF; Composite material; fiber orientation; natural fiber; coupled analysis; PPNF; Kompositmaterial; fiberorientering; naturfiber; kopplad analys;

   Abstract : The importance of using natural fiber composites (NFCs) has been addressed as a substitution for synthetic fibers, such as glass and carbon fibers. This substitution contributes significantly to reducing greenhouse gas emissions, aligning with the environmental responsibilities of engineering industries. READ MORE

5. 9. Investigation of Roughness Effects on Heat Transfer of Upscaled Additively Manufactured Channels in the Turbulent Region Using Infrared Thermography

   University essay from KTH/Skolan för industriell teknik och management (ITM)

   Author : Kaibin Wen; [2023]
   Keywords : Investigation of Roughness Effects on Heat Transfer of Upscaled Additively Manufactured Channels in the Turbulent Region Using Infrared Thermography; Additiv tillverkning; värmeöverföring; infraröd termografi; ytjämnhet; finita elementmetoden;

   Abstract : Additive manufacturing (AM) has largely improved design freedom compared with traditional manufacturing processes such as casting and milling. The layer-by-layer workflow makes it possible to produce objects with much more complex shapes and structures. READ MORE

6. 10. Digital Front End Algorithms for Sub-Band Full Duplex

   University essay from Lunds universitet/Institutionen för elektro- och informationsteknik

   Author : Midhat Rizvi; Khaled Al-Khateeb; [2023]
   Keywords : Adjacent Channel Leakage Ratio; Bit Error Rate; Clipping and Filtering; Crest Factor Reduction; Digital front end; Digital Pre-Distortion Error Vector Magnitude; Frequency Division Duplex; Power Amplifier; Peak to Average Power Ratio; Peak Cancellation Crest Factor Reduction; Sub Band Full Duplex; Self-Interference Cancellation; Signal-to-Interference Noise Ratio; Signal-to-Noise Ratio; Turbo Clipping; Time Division Duplex; Technology and Engineering;

   Abstract : Sub-band full duplex is a new communication scheme technology, where a single frequency band is partitioned into sub-bands for downlink (DL) and up-link(UL) transmissions, and both can take place simultaneously. The idea behind the sub-band full duplex development is to improve the throughput, and coverage and reduce the latency of the UL communication by allowing the UL reception during the DL transmission. READ MORE