Essays about: "Oven"
Showing result 21 - 25 of 90 essays containing the word Oven.
-
21. iTAL - Takeaway without the waste
University essay from Lunds universitet/IndustridesignAbstract : Packaging of fast food and take-out food involves a significant amount of material that ends up in landfills, recycling and litter. This is because the packaging is designed only for a single-use. There’s no future in single-use products and that includes single-use takeaway packaging. READ MORE
-
22. Energieffektivisering av Saint-Gobain AB Sweden Gyprocs torksystem : energy efficiency of Saint-Gobain AB Sweden Gyprocs drying system
University essay from SLU/Dept. of Energy and TechnologyAbstract : When producing gypsum boards at Saint-Gobain AB Sweden Gyproc an approximatly 200 m long oven is used in a drying process. In this process a lot of energy is wasted as hot flue gas and hot water. When investigating applicable heat recovery systems roughly 1 500 MWh/yr was found possible to reuse in their own facilites. READ MORE
-
23. Accelerated aging of cellulose-based composites in different climate environments : A project provided by Biofiber Tech Sweden AB
University essay from Uppsala universitet/Institutionen för kemi - ÅngströmAbstract : This paper reviews the effects of accelerated aging with increased humidity and temperature on cellulose-based composites. The composites consist of a matrix of plastic reinforced with cellulose fibers. The company Biofiber Tech Sweden AB provided four different composites and a conventional polyolefin as reference. READ MORE
-
24. Inoculant measurement with thermal analysis
University essay from KTH/MaterialvetenskapAbstract : Over time the level of inoculant will decrease due to fading and this needs to be compensated bymore additions of inoculant. When casting CGI400 at Scania a one-step method is used, and the inoculant additions are based on the last ladle from the previous oven. READ MORE
-
25. Effect of Induction-Heat Post-Curing on Residual Stresses in Fast-Curing Carbon Fibre Reinforced Composites
University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikAbstract : Manufacturing induced shape distortions is a common problem for composite materials. Due to the non-isotropic nature of carbon fibre reinforced polymers (CFRP) unavoidable deformations occur during part production. During fabrication of polymer composites, the material obtains its final shape at elevated temperatures. READ MORE