Essays about: "Support stiffness"
Showing result 11 - 15 of 31 essays containing the words Support stiffness.
-
11. Horizontal natural frequency in a 10 story building : A comparison between CLT and concrete using estimate calculations
University essay from Umeå universitet/Institutionen för tillämpad fysik och elektronikAbstract : Tall slender buildings are easily set in motion by wind and earthquakes but by estimating the buildings horizontal natural frequencies in the design phase, these motions can be kept within acceptable boundaries. There are many parameters that decides the natural frequency of a building and it can therefore be difficult to calculate it. READ MORE
-
12. Post-tensioned stress ribbon systems in long-span roofs : Case study: Västerås Travel Center
University essay from KTH/BetongbyggnadAbstract : The stress ribbon system has numerous advantages, that includes but are not limitedto: increasing overall stiffness, control deflections and reduction of materialsconsumption, which in turn, reduces the load and the cost. Nevertheless, its use isusually limited to bridges, in particular, pedestrian bridges; this can be attributedto the insufficient space that buildings’ usually have for end supports, or/and backstayedcables, that can accommodate the expected high pull-out forces occuring atthe cables’ ends. READ MORE
-
13. Compression perpendicular to the grain of Cross-Laminated Timber : Influence of support conditions of CLT on compressive strength and stiffness
University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)Abstract : Cross-Laminated Timber (CLT) has recently become a popular construction material for building timber structures. One advantage of CLT is, that it can be used as floor, beam and wall element. As the arrangements of layers in CLT is in perpendicular direction to each other, it exhibits remarkable strength properties in both in-plane directions. READ MORE
-
14. Analysis of Catenary Shaped Timber Structures
University essay from Lunds universitet/Avdelningen för KonstruktionsteknikAbstract : In the design of a building there are many parameters that effect the material efficiency. The choice of structural solution and material are two of the parameters that will be investigated further in this rapport. READ MORE
-
15. Stiffness Over the Mid-support for a Modified Single Overlap Joint of a Single Bay Trapezoidal Steel Sheet Profile Used in Long Spans
University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserAbstract : .... READ MORE