Essays about: "engine manufacturing process"

Showing result 16 - 20 of 37 essays containing the words engine manufacturing process.

  1. 16. Spice Circuit Reduction for Speeding up Simulation and Verification

    University essay from Lunds universitet/Institutionen för elektro- och informationsteknik

    Author : Menglin Wang; Cancan Yin; [2019]
    Keywords : Technology and Engineering;

    Abstract : The focus of this work has been to implement a generic netlist reduction engine to speed up circuit simulations. The netlist reduction techniques are further optimized for Static Random-Access Memory (SRAM), wherein we exploit the repetitive pattern of the circuit. READ MORE

  3. 17. Digital models of manufacturing : with emphasis on titanium welding for early product development

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Yousef Al Choueyri; Mojtaba Fayazi; [2019]
    Keywords : welding; digital models; cost analysis; svetsning; digital modell; kostnadsanalys;

    Abstract : This thesis work is part of the BTH research lab, focusing on developing the early product development, by analyzing how to integrate the manufacturing process with the early design process. A known problem in the manufacturing industry is the knowledge gap between the designers and the manufacturing process. READ MORE

  4. 18. Fuel consumption measurements and fuelconditioning in high-pressure fuel systemfor single cylinder test cell

    University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

    Author : Can Aksoy Aksoy; [2019]
    Keywords : fuel system; diesel system; single cylinder; engine test cell; test cell; high-pressure diesel; flow measurement; fuel consumption; fuel conditioning;

    Abstract : This master thesis is part of a bigger project issued by AVL with the purpose to design a high pressure compression ignition fuel system for their single cylinder test cell at their facility in Södertälje. Typically compression-ignition fuel tests are being run within an operating pressure range of 500-2400 bar, but this system has to be able to run with pressures up to 3500 bar. READ MORE

  5. 19. Exploring The Efficiency – Flexibility Dilemma Of A Manual Assembly Process

    University essay from Högskolan i Halmstad/Akademin för ekonomi, teknik och naturvetenskap

    Author : Elin Ohlsson; [2019]
    Keywords : custom manufacturing; flexibility management; innovation management; lean manufacturing; process improvement;

    Abstract : The purpose of this study was to find a method for exploring the potential of increasing the efficiency of a manual manufacturing process while simultaneously maintaining the flexibility and the ability to adjust to changes in demand. The study has been conducted in cooperation with Scania CV AB Engine Assembly in Södertälje, Sweden. READ MORE

  6. 20. Design and manufacturing of a thrust measurement system for a micro jet engine : Enabling in-flight drag estimation for subscale aircraft testing

    University essay from Linköpings universitet/Fluida och mekatroniska system

    Author : Anna Martinez; [2018]
    Keywords : thrust measurement; drag estimation; subscale aircraft; in-flight measurements;

    Abstract : Good estimation of aerodynamic coefficients is of fundamental importance in the design and development process of an aircraft. Generally, these parameters are obtained using analytical, numerical and experimental methods, which are sometimes either inaccurate or very expensive. READ MORE