Essays about: "finita element analyser"

Showing result 1 - 5 of 42 essays containing the words finita element analyser.

  1. 1. Heat transfer analysis on LED-board in closed environment

    University essay from Malmö universitet/Fakulteten för teknik och samhälle (TS)

    Author : Victor Eneberg; Johannes Linby; [2022]
    Keywords : LED; heat sink; motorcycle; light; headlight; FEM; CFD; IR camera; thermocouple; kylfläns; motorcykel; belysning; halvljus; IR-kamera; thermoelement;

    Abstract : Motorcyclists are more often involved in accidents with severe harm or even fatal outcome compared to other road users. An experienced motorcycle driver is well familiar with the problem when the day light is reduced. The visibility is of course highly decreased. READ MORE

  3. 2. Back analysis of rock mass properties in the regional fault zone under Lake Mälaren

    University essay from KTH/Jord- och bergmekanik

    Author : Jiaqi Liu; [2022]
    Keywords : Rock mass property; back analysis; tunnel deformation; optimization algorithm; numerical analysis; Bergmassans egenskaper; bakåtanalys; tunnleldeformation; optimeringingsalgoritm; numeriska analyser.;

    Abstract : The properties of the surrounding rock mass in underground projects have significant impacts on the design and construction. However, it is quite challenging to evaluate rock mass properties due to the great uncertainties of the geological conditions. READ MORE

  4. 3. Evaluation of a testing method for shear stiffness properties for cross laminated timber

    University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaper

    Author : Calle Lind; [2022]
    Keywords : CLT; cross laminated timber; EN 16351; four-point bending; rolling shear modulus; FE-modelling; Technology and Engineering;

    Abstract : Cross laminated timber (CLT) is an engineered wood product that was first developed in the 1990s. Since then it has grown in popularity thanks to its many advantages such as: low environment impact, high degree of prefabrication and low weight. As the material is relatively new the standardization process is still in the early stages. READ MORE

  5. 4. Non-Linear strain paths in Sheet Metal Forming

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Anton Eriksson; [2021]
    Keywords : Sheet metal forming SMF ; Non-Linear strain path NLSP ; Test procedures; Failure models; Finite Element FE ; Plåtformning; Icke-linjära töjningsbanor; Test procedurer; brott model; Finita Element FE .;

    Abstract : Today's automotive requirements have resulted in complex Sheet Metal Forming (SMF) processes of Sheet Metal (SM) with reduced formability, and thus it is crucial to be able to predict formability accurately to prevent material failure during SMF. Formability predictions today utilize Forming Limit Curves (FLC)s in Finite Element Analysis (FEA), but  FLCs are not valid for the Non-Linear Strain Paths (NLSP)s generated during SMF. READ MORE

  6. 5. An aeroelastic prediction model for slender wings in supersonic flow

    University essay from KTH/Flygdynamik

    Author : Zakarias Priebe; Alexander Hasp Frank; [2021]
    Keywords : ;

    Abstract : Aeroelasticity is a multidisciplinary subject encompassing several fields of study. Aeroelastic behaviour is defined by the relation between inertial-, elastic- and aerodynamic forces that appear in dynamic systems in steady- or unsteady conditions. READ MORE