Essays about: "parametrisk studie"

Showing result 1 - 5 of 34 essays containing the words parametrisk studie.

  1. 1. Investigation of Injury Predictors for Rat Neuro Trauma

    University essay from KTH/Medicinteknik och hälsosystem

    Author : Rosetta Maglio; [2024]
    Keywords : Finite element method; Rat brain traumatic brain injury; Rat brain finite element model; Strain; Strain rate; Product of strain and strain rate; Rotational direction; Rotational duration; Injury prediction; Finita elementmetoden; Råtthjärnans finita elementmodell; Belastning; Belastningshastighet; Produkten av belastning och belastningshastighet; Rotationsriktning; Rotationstid; Skadeförutsägelse;

    Abstract : A traumatic brain injury is usually caused by a direct impact to the head and is a common cause of disability and death all around the world. The most effective method to predict brain injury today, is to use a finite element head model. READ MORE

  3. 2. Vehicle dynamics modelling of electromagnetic suspensions for MAGLEV applications

    University essay from KTH/Väg- och spårfordon samt konceptuell fordonsdesign

    Author : Léa Chatelais; [2024]
    Keywords : MAGLEV; Dynamics; Requirements; Suspension; Vehicle modeling; MATLAB; MAGLEV; Dynamisk; Fordran; Upphängning; Fordon modell; MATLAB;

    Abstract : MAGnetic LEVitation Guidance System (MAGLEV) technology was commercially introduced relatively recently in the guided transport field. It is based on removing the wheels and rails of classic railway systems and supporting and guiding the train with magnets and magnetic forces instead. READ MORE

  4. 3. Validation of Simultaneous T1 and T2 Mapping Using Cardiac Magnetic Resonance Fingerprinting in Self-Constructed Phantoms : An Analysis of the Reproducibility and Accuracy

    University essay from KTH/Skolan för kemi, bioteknologi och hälsa (CBH)

    Author : Sasithon Meesan; [2023]
    Keywords : Cardiac Magnetic Resonance Fingerprinting cMRF ; Cardiac Magnetic Resonance Imaging CMR ; Simultaneous T1 and T2 Mapping; Validation; Accuracy; Reproducibility; Cardiac Magnetic Resonance Fingerprinting cMRF ; Kardiovaskulär Magnetresonans CMR ; Simultant T1 och T2 Parametrisk-Karaktärisering; Validering; Noggrannhet; Reproducerbarhet;

    Abstract : Quantitative cardiac magnetic resonance imaging (CMR) has gained traction within both the clinical and research field due to high prevalence of cardiovascular diseases. Cardiac magnetic resonance fingerprinting (cMRF) is a novel approach introduced to address the limitation associated with evaluation of multiparametric quantitative CMR. READ MORE

  5. 4. Numerical Modelling of a Packed Bed Thermal Energy Storage for Applications in a Carnot Battery : KTH Thesis Report

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Gabriel Juul; [2023]
    Keywords : Thermal energy storage; Carnot battery; sand; packed bed; granular medium; porous medium; effective medium technique; effective thermal conductivity; paramedic study; 3D model; COMSOL; numerical modelling; Lagring av värmeenergi; Carnot-batteri; sand; packad bädd; granulärt medium; poröst medium; effektiv mediumteknik; effektiv värmeledningsförmåga; parametrisk studie; 3D-modell; COMSOL; numerisk modellering;

    Abstract : This thesis explores the heat transfer characteristics of a packed bed thermal energy storage device through the development of a 3D model in COMSOL Multiphysics. The model is based on a laboratory-scale device consisting of an aluminum box filled with sand, which acts as the thermal storage medium. READ MORE

  6. 5. Dimensioning study of EPR2 fuel pool cooling system

    University essay from KTH/Fysik

    Author : Thomas Rubler; [2023]
    Keywords : EPR2; PTR; spent fuel pool; heat exchange; EPR2; PTR; bassäng för utbränt kärnbränsle; värmeväxling.;

    Abstract : The PTR system allows the EPR2 fuel pool to be cooled. The evacuation of the residual power fromthe pool is ensured by several heat exchangers and pumps, which have to be dimensioned in order to meetdifferent requirements.In order to dimension them, the worst-case scenario of the components must first be determined. READ MORE