Essays about: "tätning"
Showing result 6 - 10 of 18 essays containing the word tätning.
-
6. Undocumented oil leakages : A study about stern tube seals and leakages
University essay from Linnéuniversitetet/Sjöfartshögskolan (SJÖ)Abstract : The majority of the vessels in the commercial fleet utilize oil lubricated stern tubes. Unfortunately, this brings about a risk of oil leaking from the stern tube into the marine environment if the stern tube seal would become worn or damaged by foreign materials. Previous studies concluded that, on average, 2. READ MORE
-
7. Investigating the state of rural water supply in Rio Grande do Sul, Brazil - a regional study on the implementation of United Nations Sustainable Development Goal 6.1: safe and affordable drinking water for all
University essay from Lunds universitet/Avdelningen för Teknisk vattenresursläraAbstract : Access to clean drinking water is a human right and a necessity for life, yet many rely on precarious water sources across the world. The United Nations outlines a great aspiration in Agenda 2030 - that safe and affordable drinking water should be available for all by 2030. READ MORE
-
8. Standard vs. revolutionary sealing: : An investigative thesis on two methods of conceptual designing with regards to the root causes of failure mode in raw mill 7.
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : The grinding rollers of raw mill 7 operate in very harsh conditions and, because of this, suffer from excessive failure mode due to lip seal deterioration. Foreign material penetrates the deteriorated lip seal and enters the bearings resulting in bearing failure. READ MORE
-
9. Wiper Module for Outdoor Housings
University essay from Lunds universitet/InnovationAbstract : This report describes the product development process of a new product series of camera housings, adapted for modular applications. The purpose of the project was to develop a module containing a wiper, adapted for outdoor camera housings. READ MORE
-
10. Optimization of pneumatic activity sensor : Development of a low friction seal
University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Abstract : In this thesis, the development of a new type of seal is presented along with the steps taken to attain the conclusive design. The results are presented in this paper as a cross-sectioned CAD-model along with the selection of materials and suggestions for future work. READ MORE