Essays about: "thesis on QUALITY for defects"

Showing result 21 - 25 of 74 essays containing the words thesis on QUALITY for defects.

  1. 21. Numerical Assessment of Defects Effect on Boltless Composites Longitudinal Joints

    University essay from KTH/Lättkonstruktioner

    Author : Mara Santaniello; [2020]
    Keywords : ;

    Abstract : The work presented in this thesis focuses on the numerical assessment of defects effect on potential boltless design for fuselage panels longitudinal joints, typically identified as High Load Transfer (HLT) configuration. Nowadays, the state-of-art joining technique for primary aircraft composite structures, such as fuselage barrels, is still mechanical fastening. READ MORE

  3. 22. FEASIBILITY STUDY: THE REDUCTION OF DEFECTIVE HOLES IN PLASTIC FLOORING MANUFACTURING

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Anton Senbom; [2020]
    Keywords : ;

    Abstract : Defects are a common phenomenon related to the manufacturing of products in industries and unavoidable to a full degree. Companies can manage or mitigate risks relating to manufacturing through standardization in processes, methods, and quality checks. READ MORE

  4. 23. Process and microstructure development of a LPBF produced maraging steel

    University essay from Karlstads universitet/Avdelningen för maskin- och materialteknik

    Author : Kenny Johansson; [2020]
    Keywords : Maraging steels; additive manufacturing; Laser Powder Bed Fusion; LPBF; additiv tillverkning; maråldringsstål; pulverbädd;

    Abstract : Additive manufacturing (AM) has the possibility of producing complex-shaped components which can not be produced by conventional manufacturing methods. This gives the opportunity for designers to freely think outside the design spectra which is otherwise limited by conventional manufacturing methods. READ MORE

  5. 24. Properties of epitaxial lateral overgrowth of GaAsP and GaAs grown by hydride vapor phase epitaxy

    University essay from KTH/Tillämpad fysik

    Author : Lakshman Srinivasan; [2020]
    Keywords : GaAsP; ELOG; HVPE; Photoluminescence; Raman;

    Abstract : Direct heteroepitaxy of III-Vs on silicon (Si) has always been a challenge and there are various strategies to integrate these materials. This thesis deals with one such strategy known as Epitaxial lateral overgrowth (ELOG) which is extensively supported by experiments. READ MORE

  6. 25. Production Process Development

    University essay from Lunds universitet/Industriell Produktion

    Author : Richard Sundbye; Marcus Strandberg; [2019]
    Keywords : Technology and Engineering;

    Abstract : The master thesis is a collaboration between Trelleborg AB and the division of Production and Materials Engineering at Lund University, Faculty of Engineering. The objective of the thesis has been to analyse the current production system from a lean perspective, identify an area in need of improvement and generate concrete solutions for how the studied area can be improved in terms of cost, performance and from a lean perspective. READ MORE