Essays about: "3d measurement"
Showing result 16 - 20 of 187 essays containing the words 3d measurement.
-
16. The Stern-Gerlach Spectrometer for Charged Particles : A step towards an alternative method for measuring spin
University essay from Lunds universitet/Synkrotronljusfysik; Lunds universitet/Fysiska institutionenAbstract : The purpose of this project is to investigate the performance of a spectrometer capable of measuring both momentum and spin of particles. More specifically, we investigated what parameters are required in order to separate particles with opposite spins at least 1 mm. READ MORE
-
17. Autonomous Propulsion for a GPR-UGV
University essay from Umeå universitet/Institutionen för fysikAbstract : This thesis presents the research and development behind the integration of an autonomous propulsion system for a four-wheeled Ground Penetrating Radar (GPR) measurement unit, previously requiring manual operation. In order to ease the administration of the complex new system, Robot Operating System (ROS) 2 was used as middleware, where an implementation of Light Detection And Ranging (LiDAR) 3D-SLAM (Simultaneous Localization And Mapping) served to secure precise localization of the Unmanned Ground Vehicle (UGV) and mapping of its environment. READ MORE
-
18. Conductive interferences from multiple EC-motor installation : To measure and mitigate harmonics
University essay from Uppsala universitet/Signaler och systemAbstract : Products produced by a Swedish company are requested to be investigated regarding their harmonic and inter-harmonic currents injected into the public supply system to comply with the Swedish standard SS-EN IEC 61000-3-2, Electromagnetic compatibility (EMC). On behalf of Systemair Sweden AB, this bachelor thesis aims firstly to investigate if their product, PAFEC 4225 WH (Air Curtain), complies with standard SS-EN IEC 61000-3-2, and if not, what measures should be taken; and secondly to develop a low-cost instrument for the measurement of harmonics and inter-harmonics according to standard IEC 61000-4-7 related to the requirements on equipment used in standard SS-EN IEC 61000-3-2. READ MORE
-
19. Application of ERT for Quality Assurance in Jet Grouting Columns; A development of an alternative quality control
University essay from Lunds universitet/Teknisk geologi; Lunds universitet/Väg- och vattenbyggnad (CI)Abstract : With the increased urbanization major cities are facing, expansion of larger facilities and households are inevitable. Expansion means larger areas of the surface needs to be used where the risk of varying subsurface soil properties increases with larger surface areas. READ MORE
-
20. Head impact detection with sensor fusion and machine learning
University essay from Luleå tekniska universitet/Institutionen för system- och rymdteknikAbstract : Head injury is common in many different sports and elsewhere, and is often associated with differentdifficulties. One major problem is to identify and value the injury or the severity. Sometimes there is no sign of head injury, but a serious neck distortion has occurred, causing similar symptoms as head injuries e.g. READ MORE