Essays about: "injection system"

Showing result 1 - 5 of 210 essays containing the words injection system.

  1. 1. Integrating Waste Heat from Hydrogen Production Into District Heating

    University essay from Lunds universitet/Institutionen för energivetenskaper

    Author : Fawzi Kayali; [2023]
    Keywords : Hydrogen; Electrolysis; Waste Heat Recovery; Combined Heat and Power Plant; District Heating; Simulation; Sustainable Heating Systems; Technology and Engineering;

    Abstract : The aim of this research is to explore the feasibility of the integration of waste heat from electrolyzers within a Combined Heat and Power (CHP) plant and district heating (DH) network and suggest a practical setup for integration. With the escalating emphasis on the development of green hydrogen through electrolysis powered by renewable energy, a substantial amount of waste heat is generated, typically left unused. READ MORE

  3. 2. Surface and Subsurface Flow Connection and Dominating Runoff Mechanism in Hillslope of Tarfala, Northern Sweden.

    University essay from Uppsala universitet/Luft-, vatten- och landskapslära

    Author : Namika Maharjan; [2023]
    Keywords : Advanced Terrestrial Simulator ATS ; hillslope connectivity; tracer test; hydrological modeling; parameter analysis; sub artic regions; hillslope hydrology;

    Abstract : The Sub artic regions are becoming increasingly important due to the effects of climate change. In northern Sweden, thawing of permafrost has led to significant increases in annual minimum flows in several catchments. READ MORE

  4. 3. Continuous Fibre Reinforcements in Injection Moulded Composites

    University essay from KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanik

    Author : Erik Björkqvist; [2023]
    Keywords : Injection moulding; Plastics; Thermoplastics; Fibre Reinforcement; FEM; Formsprutning; Plast; Termoplast; Fiberarmering; FEM;

    Abstract : The use of continuously reinforced thermoplastics have increased in recent years andoffer some significant advantages over their thermoset counterparts. The utilizationof these materials is however still limited due to the labour intensive processingand manufacturing. READ MORE

  5. 4. Towards a Stochastic Operation of Switzerland’s Power Grid

    University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)

    Author : Alban Maury; [2023]
    Keywords : Monte-Carlo simulations; probabilistic forecasting; copula theory; power flow analysis; Monte Carlo-simuleringar; probabilistiska prognoser; kopulateori; analys av energiflöden;

    Abstract : As Europe’s power production becomes increasingly reliant on intermittent renewable energy sources, uncertainties are likely to arise in power generation plans. Similarly, with the growing prevalence of electric vehicles, electric demand is also becoming more uncertain. READ MORE

  6. 5. Modeling, Simulation, and Injection of Camera Images/Video to Automotive Embedded ECU : Image Injection Solution for Hardware-in-the-Loop Testing

    University essay from Uppsala universitet/Signaler och system

    Author : Anton Lind; [2023]
    Keywords : ADAS; AD; ADS; HIL; Hardware in the loop; Hardware-in-the-loop; ECU; VCU; Automotive; Embedded; System; Systems; Camera; Image; Video; Injection; FPGA; MPSoC; Vivado; Vitis; VHDL; Volvo; Cars; FMC; HPC; LPC; MIPI CSI2; GMSL2; AMBA AXI4; Xilinx; RTL; Implementation; Synthesis; Intelectual Property; IP; Vehicle computing unit; Electronic control unit; TEB0911; TEF0007; TEF0010; CSI2 Tx; CSI2 Tx Subsystem; Zynq; SerDes; AXI4; AXI4-Lite; Programmable Logic; PL; Processor System; PS; C; C ; Video test pattern generator; VTPG; Axi traffic generator; ATG; Ultrascale ; Virtual input output; VIO; Integrated logic analyzer; ILA; Interface Unit;

    Abstract : Testing, verification and validation of sensors, components and systems is vital in the early-stage development of new cars with computer-in-the-car architecture. This can be done with the help of the existing technique, hardware-in-the-loop (HIL) testing which, in the close loop testing case, consists of four main parts: Real-Time Simulation Platform, Sensor Simulation PC, Interface Unit (IU), and unit under test which is, for instance, a Vehicle Computing Unit (VCU). READ MORE