Essays about: "3 factor model"

Showing result 11 - 15 of 221 essays containing the words 3 factor model.

  1. 11. Accelerating the Green Transition - Investigating the Feasibility of E-Fuel Production Connected to a CHP Plant

    University essay from Lunds universitet/Institutionen för energivetenskaper

    Author : Johanna Scholtz; Alice Maillard; [2023]
    Keywords : CCU; CHP plant; e-fuels; e-methane; e-methanol; e-kerosene; Technology and Engineering;

    Abstract : The overall purpose of this thesis is to investigate the feasibility of producing electrofuels from CO2 and H2 in connection to a CHP plant equipped with carbon capture technology. This is done by investigating the production of e-methane, e-methanol and e-kerosene from captured CO2 and H2 produced from electrolysis. READ MORE

  3. 12. Application of Biomimetic Membrane Models in Expansion Microscopy

    University essay from KTH/Proteinvetenskap

    Author : Praghadhesh Thiagarajan; [2023]
    Keywords : Fluorescence microscopy; expansion microscopy; GPMV; inter-leaflet asymmetry; Fluorescensmikroskopi; expansionsmikroskopi; GPMV; asymmetri mellan lagren;

    Abstract : Plasmamembranet är en komplex struktur som består av biomolekyler som lipider, proteiner och glykaner. Membranets rena komplexitet begränsar vår förmåga att förstå den spatiotemporala dynamiken hos sådana komponenter och deras kollektiva biofysiska membranparametrar. READ MORE

  4. 13. Oven Usage Optimization : A study on scheduling at the wear edge production at Olofsfors AB

    University essay from Umeå universitet/Institutionen för matematik och matematisk statistik

    Author : Anna Karlsson; [2023]
    Keywords : Scheduling problem; Re-entrant hybrid flow shop; Packing problem; Batching rules; Sensitivity analysis; Genetic algorithm; Schemaläggningsproblem; Packingingsproblem; Laststorleksregler; Känslighetsanalys; Genetisk algoritm;

    Abstract : Olofsfors is a steel product manufacturer in Nordmaling, Sweden, producing steel edges for snowplows, tracks for forest machines, and wear edges for buckets on heavy equipment. Most of their products are heated to 900◦ C and then cooled down in water, so-called quenching, during the hardening process. READ MORE

  5. 14. Modelling the full-scale N2O emissions from wastewater treatment plants for identifying mitigation strategies

    University essay from Lunds universitet/Kemiteknik (CI)

    Author : Naga Deepika Peddamudium; [2023]
    Keywords : Modelling; simulation; ASM2dISS; N2O production pathways; N2O emission factor; mitigation strategies; water and environmental engineering; Technology and Engineering;

    Abstract : Nitrous oxide (N2O) emissions, which primarily originate from the biological nitrogen removal process, dominate the release of greenhouse gases (GHGs) in wastewater treatment plants (WWTPs). N2O production occurs through dynamic microbial pathways that have a significant impact on the environment compared with other GHG emissions. READ MORE

  6. 15. Effects of temperature and microplastic concentration on the consumption of microplastic particles by the detritivore Asellus aquaticus

    University essay from SLU/Dept. of Aquatic Sciences and Assessment

    Author : Yasmin Screech; [2023]
    Keywords : Microplastic; Asellus aquaticus; concentration; temperature; faecal pellets;

    Abstract : Microplastic (MP) pollution has now reached a point where particles can be found in every environmental compartment across the globe. However, the ecological and long-term consequences of MPs are largely unknown. READ MORE