Essays about: "FABRICATION"

Showing result 16 - 20 of 323 essays containing the word FABRICATION.

1. 16. Fabrication and characterization of GaAsxP1-x single junction solar cell on Si for III-V/Si tandem solar cell

   University essay from KTH/Tillämpad fysik

   Author : Elaheh Aghajafari; [2023]
   Keywords : III-V semiconductor; GaAsxP1-x heteroeputaxy; hydride vapor phase epitaxy; III-V Si solar cell; III-V halvledare; GaAsxP1-x epitaxiallager; hydridångfasepitaxi; III-V Si solcell;

   Abstract : Silicon based solar cells have been used as photovoltaic devices for decades due to reasonable cost and environment- friendly nature of silicon. But the conversion efficiency of silicon solar cell is limited; for instance, the maximum conversion efficiency of a crystalline silicon solar cell available in the market developed by Kaneka Corporation is 26 % [1]. READ MORE

3. 17. Exploring the Possibilities of Sheet Metal Forming Via Plastic-Based Additive Manufacturing Moulding

   University essay from KTH/Produktionsutveckling

   Author : Jemal Idris Ismail; Kafeel Olanrewaju Sanni; [2023]
   Keywords : : Sheet metal formation; Additive manufacturing; mass customization; personalized production; die design; die system; FDM; DOE; FEA; product development; automotive; sustainability; cost effective; metal dies; plastic dies.; Plåtformning; Additiv tillverkning; massanpassning; personlig produktion; formdesign; formsystem; FDM; DOE; FEA; produktutveckling; fordonsindustri; hållbarhet; kostnadseffektiv; metallformar; plastformar.;

   Abstract : Additive Manufacturing (AM) has freeform fabrication capabilities of complex geometries directly from feedstock material. This can potentially enhance the efficient use of material and the cost effectiveness. It also offers design flexibility, and it is versatile. READ MORE

4. 18. Developing an Ar milling process to improve the contact quality to InAs nanowires

   University essay from Lunds universitet/Fysiska institutionen; Lunds universitet/Fasta tillståndets fysik

   Author : Chris Mkolongo; [2023]
   Keywords : InAs nanowires; Argon milling; Technology and Engineering;

   Abstract : The aim of this work was to develop a stable and reproducible argon milling process for InAs nanowires to remove the native oxide layer that increases electrical resistance. This was done by identifying a few milling parameters and studying them in relation to the milling rate of silicon dioxide (SiO2). READ MORE

5. 19. Fabrication of battery separator by coating with sulfonated cellulose nanofibrils on kraft paper and inkjet paper substrates : Tillverkning av batteriseparator genom bestrykning med sulfonerad cellulosananofibriller på kraft papper och bläckstråle papper substrat

   University essay from Karlstads universitet/Avdelningen för kemiteknik

   Author : Forat Alshogran; [2023]
   Keywords : modified nanocellulose; coating; battery separator; contact angle; mechanical strength; permeance; ionic conductivity;

   Abstract : Modified nanocellulose have distinctive qualities and have drawn a lot of interest from a variety of fields. It is a natural, sustainable product that is manufactured from plant-based materials like wood and other renewable resources. It is also biodegradable. READ MORE

6. 20. Thin Indium Tin Oxide Layer Development for Crystalline Silicon/Perovskite Two Terminal Tandem Solar Cell

   University essay from KTH/Skolan för industriell teknik och management (ITM)

   Author : Aravind Srinivasachari; [2023]
   Keywords : Indium Tin Oxide; Thin-film characterisation; Magnetron Sputtering; Screen printing; Tandem Solar Cells; Indium-tennoxid; karaktärisering av tunnfilm; magnetronförstoftning; screentryck; tandemsolceller;

   Abstract : ITO is widely regarded as the optimal TCO for serving as front window layer in PSK/c-Si tandem solar cells. It is known to effectively mitigate several stability issues present in perovskite solar cells while demonstrating excellent lateral conductivities and optical transparency across the entire solar spectrum. READ MORE