Essays about: "Fracture surface analysis"
Showing result 21 - 25 of 29 essays containing the words Fracture surface analysis.
-
21. Influence of annual ring orientation on compression strength perpendicular to grain in glulam
University essay from Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperAbstract : This thesis presents an analysis of glued laminated timber (glulam) when loaded in compression perpendicular to the grain. Both theoretical and experimental investigations have been carried out. The main focus was related to the growth ring patterns of the laminations and their influence on the stresses, the strains and the failure mode. READ MORE
-
22. DEVELOPMENT OF A MODEL OF THE DEGRADATION OF THE MECHANICAL PROPERTIES OF POLYOXYMETHYLENE (POM) IN THE PRESENCE OF BIODIESEL
University essay from Högskolan i Skövde/Institutionen för ingenjörsvetenskapAbstract : This project analyses the impact in the mechanical properties of Polyoxymethylene (POM) of three different blends of biodiesels: B0 with 0% of Rapeseed Methyl-ester (RME), B20 with 20% of RME and B100 with 100% of RME. Polyoxymethylene specimens have been subjected to an accelerated aging during 1600 hours at 85ºC. READ MORE
-
23. The Mechanical and Fracture Property of HDPE-Experiment Result Combined with Simulation
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : The aim of this work is the evaluation of different specimen dimensions and crack length on the mechanical properties of HDPE (high quality density polyethylene) which it is often used in the packing industry. Two mother shape specimens are chosen and one is dog-bone shaped specimen, the other is shear specimen for studying shear damage. READ MORE
-
24. Impact of pressure on Sintering of Cemented Carbides
University essay from KTH/MaterialvetenskapAbstract : In this Master Thesis work, the effect of pressure on sintering of cemented carbides is investigated. Special focus hasbeen given to the residual porosity after sintering. It is well known that sintering shrinkage depends on binder phasecontent, grain size, temperature and pressure. Thus 4 different cemented carbides grades were selected. READ MORE
-
25. Structural Material Investigation of Horse Hoof
University essay from Institutionen för teknik och samhälleAbstract : This research focuses on a study of the material parameters of horse hoof. The study of the problem with the factors that affect to the fastening of the shoe is not performed. READ MORE