Essays about: "Thesis on production process and control"

Showing result 1 - 5 of 193 essays containing the words Thesis on production process and control.

  1. 1. Evaluation of OPAL-RT Simulator through Simulation of Microgrid with High Penetration of DER

    University essay from Uppsala universitet/Elektricitetslära

    Author : Anton Grönberg; [2024]
    Keywords : Real-Time simulation; Power System Simulation; OPAL; DER;

    Abstract : This thesis was written in collaboration with the department of electrical engineering at Uppsala University. It evaluates and tests the potentials and limitations of using the OPAL-RT simulator as a tool for designing and developing control strategies used in microgrids with a high penetration of distributed energy resources. READ MORE

  3. 2. Optimizing the Performance and Efficiency of District Heating Substations : A Study of the Cooling Process and Overall System Improvements in Ludvika

    University essay from Högskolan Dalarna/Institutionen för information och teknik

    Author : Marwan Ali; Eema Sheykhi Narani; [2023]
    Keywords : Energy efficiency in multi-family buildings; District heating efficiency; Sustainability; District heating control; Cooling process;

    Abstract : The concept of future sustainability is driving efforts toward the efficient improvement of energy systems. District heating systems play a key role in balancing the energy system by improving performance and flexibility. READ MORE

  4. 3. Methods for local energy and climate planning : A Case stuudy on the Urban Community of Dunkirk

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Sacha Thibault; [2023]
    Keywords : Energy transition - Climate and energy policy - Renewable energy - Decision-Support Tools - Local authorities; Energiomställning - Klimat- och energipolitik - Förnybar energi - Verktyg för beslutsstöd - Lokala myndigheter;

    Abstract : Energy management concerns were raised in France after the oil crisis in the 1970s. From then, the local actors developed policies to better control the energy production and consumption on the territories. Climate considerations and the need to limit greenhouse gases (GHG) emissions were then added to these energy issues in the early 2000s. READ MORE

  5. 4. The Application of Multivariate Statistical Process Control during Industrial Hot Isostatic Pressing Sintering Processes : A Case study at Seco Tools AB

    University essay from Luleå tekniska universitet/Institutionen för ekonomi, teknik, konst och samhälle

    Author : Karl Ericsson; [2023]
    Keywords : Multivariate statistical process control; Batch processes; Quality prediction;

    Abstract : This Master's thesis focuses on improving the understanding and monitoring of the Hot Isostatic Pressing (HIP) sintering process used by Seco Tools AB to manufacture cemented carbides for cutting tools. While essential for producing cutting tools with superior hardness and toughness the HIP sintering process introduces a complex relationship between the selected process parameters and the achieved materials properties. READ MORE

  6. 5. Developing an ML-based model for RF tuning of the DTL machine at ESS

    University essay from Lunds universitet/Institutionen för reglerteknik

    Author : Amin Hosseini Nejad; [2023]
    Keywords : Technology and Engineering;

    Abstract : The European Spallation Source (ESS) infrastructure is being constructed in Lund, and will be one of the most powerful research facilities of its type in the world. The ESS linear accelerator (linac) utilizes different accelerating sections where a wide variety of techniques should be employed to accelerate a beam of protons to 2 GeV kinetic energy through Radio Frequency (RF) cavities before being collided with a tungsten target for the final production of neutrons, through the process of spallation. READ MORE