Essays about: "master thesis in CMOS technology"

Showing result 6 - 10 of 25 essays containing the words master thesis in CMOS technology.

  1. 6. Measurement and Characterization of 28 nm FDSOI CMOS Test Circuits for an LTE Wireless Transceiver Front-End

    University essay from Linköpings universitet/Elektroniska Kretsar och System

    Author : Mohammad Billal Hossain; [2016]
    Keywords : FDSOI CMOS; Transceiver; RF Switch; LTE; and Wireless.;

    Abstract : This master thesis was part of a project at the Acreo Swedish ICT AB to investigate the 28 nm FDSOI CMOS process technology for the LTE front-end application. The project has resulted in a chip that contains different test circuits such as power amplifier (PA), mixer, low noise amplifier (LNA), RF power switch, and a receiver front-end. READ MORE

  2. 7. DLL Based Reference Multiplier for the use in a PLL for WLAN applications

    University essay from Lunds universitet/Fysiska institutionen

    Author : Kamal Gupta; [2015]
    Keywords : reference multiplier; Frequency synthesizer; Frequency multiplier; PLL; DLL; Delay locked loop; VCDL; inverter-based VCDL; charge pump; XOR phase detector; phase noise; 4X multiplier; Technology and Engineering;

    Abstract : This master’s thesis project report deals with the design of multiplier for the reference signal to the Phase Locked Loop (PLL) used in WLAN application. The reference multiplier designed is based on a newly proposed architecture of dual loop feedback Delay Locked Loop (DLL) in which multiplication is performed within the loops. READ MORE

  3. 8. Micro-CT for small animal imaging : Optimization of the tube voltage for low-contrast imaging

    University essay from KTH/Skolan för teknik och hälsa (STH)

    Author : Massimo Terrin; [2015]
    Keywords : ;

    Abstract : This master thesis evaluated the optimal tube voltage for low-contrast imaging of a micro-CT system (intended for small animal imaging) built at the School of Technology and Health (STH) of the Royal Institute of Technology (KTH). The main goal of this work was to calibrate the above-mentioned device (composed moreover by a Hamamatsu microfocus L10951-01 X-ray tube, a CMOS flat panel Hamamatsu C7942CA-22 and using a Cone-Beam CT reconstruction algorithm) for obtaining the best imaging of low-contrast structures. READ MORE

  4. 9. Performance of a Micro-CT System : Characterisation of Hamamatsu X-ray source L10951-04 and flat panel C7942CA-22

    University essay from KTH/Skolan för teknik och hälsa (STH)

    Author : Michael Baumann; [2014]
    Keywords : micro-CT; computed tomography; flat panel; characterisation; performance evaluation; Hamamatsu; image correction;

    Abstract : This master thesis evaluated the performance of a micro-CT system consisting of Hamamatsu microfocus X-ray source L10951-04 and CMOS flat panel C7942CA-22. The X-ray source and flat panel have been characterised in terms of dark current, image noise and beam profile. READ MORE

  5. 10. Flow Cytometry Sensor System Targeting Escherichia Coli as an Indicator of Faecal Contamination of Water Sources

    University essay from Linköpings universitet/Teknisk biologi; Linköpings universitet/Tekniska högskolan

    Author : Tobias Benselfelt; [2014]
    Keywords : Sensor system; Water quality; Flow cytometry; Faecal contamination; Faecal indicator; Escherichia Coli; Untreated water; Near infrared light; NIR; Antibody; Immunoglobulin; IgY; Alexa Fluor 790; Photomultiplier tube; CMOS; camera.;

    Abstract : Poor water quality is a global health concern affecting one billion people around the world. It is important to monitor water sources in order to maintain the quality of our drinking water and to avoid disease outbreaks. READ MORE