Essays about: "rapid oxidation"

Showing result 1 - 5 of 8 essays containing the words rapid oxidation.

  1. 1. Investigation of Methods to Improve PZT Sol-Gel Deposition Process for Energy Harvesting Applications

    University essay from KTH/Hälsoinformatik och logistik

    Author : Mikael Granberg; [2022]
    Keywords : PZT; sol-gel; self-polarization; seed layer; titanium oxidation; PZT; sol-gel; självpolarisering; seedlager; titanoxidering;

    Abstract : The purpose of this work was to investigate ways to modify Silex sol-gel deposition of PZT (PbZrxTi(1-x)O3, Lead Zirconate Titanate) in order to improve its properties for energy harvesting applications. A number of methods to improve the figure of merit for energy harvesting (FOM= e312/ε), cause self-polarization, increase lifetime, reduce cost, increase throughput or simplify processing were tested. READ MORE

  3. 2. Ozone oxidation of fatty acid thin films: a TIR Raman study

    University essay from KTH/Yt- och korrosionsvetenskap

    Author : Frida Preuss; [2022]
    Keywords : ozone oxidation; TIR Raman; fatty acid; vibrational spectroscopy; thin film formation; ozonoxidation; TIR Raman; fettsyra; vibrationsspektroskopi; skapande av tunna filmer;

    Abstract : Detta examensarbete initierades och handledes av Mellifiq, ett företag som arbetar med rening av luft och vatten, där en applikation är rening av köksfrånluft med ozon. Ozon förhindrar att fettpartiklar i frånluften ansamlas på väggarna i kanalen och värmeväxlaren, vilket leder till högre brandsäkerhet och mer effektiv användning av värmeväxlaren. READ MORE

  4. 3. Pulp compositions and their influence on the production of dialcohol cellulose

    University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Author : Viktoria Carlsson; [2020]
    Keywords : ;

    Abstract : The characteristics of products made from pulp can be modified through different methods. If the pulp is refined either laboratory or industrially, the fibres in the pulp become more flexible and therefore creates stronger bonds to each other, which results in a final product with a higher strength. READ MORE

  5. 4. Design Investigation into Liquid Oxygen Vaporisation Systems : Atomisation and Heat Loads

    University essay from KTH/Energiteknik

    Author : Borbala Bernus; [2020]
    Keywords : LOx; gasification; two-phase CFD simulation; rapid oxidation; rocket; cryogenic; hybrid; atomisation; LOx; förgasning; 2-fas CFD-simulering; snabb oxidation; raket; kryogen; hybrid; atomisering;

    Abstract : Computational Fluid Dynamics (CFD) simulations are presented within this study for super-cooled liquid oxygen atomisation and gasification in a subcritical chamber operating at 1MPa. Relatively low cost simulation techniques have been used and their accuracy evaluated. READ MORE

  6. 5. Thermo-Oxidative Degradation of High Temperature Polyimide Composites : Characterization and Modeling of Composites Affected by an Extreme Environment

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Magnus Persson; [2016]
    Keywords : Polyimide composite material; thermal and oxidative degradation; glass transition temperature; stiffness modeling;

    Abstract : Carbon fiber (CF) 8-harness satin weave, T650/Neximid system of [(+45/-45)/(0/90)]2S and [(0/90)]4S layup was manufactured using resin transfer molding (RTM). The material was cut into 3-point bending specimens and treated for 24 hours in a burn oven at T=(320,350,375,400,450 & 500)°C. READ MORE