Essays about: "shell and tube"

Showing result 1 - 5 of 16 essays containing the words shell and tube.

  1. 1. Development and characterization of multi-streams heat exchangers for liquefaction cycle analysis in the contextof hydrogen mobility

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : WULLSCHLEGER LÉA; [2023]
    Keywords : Liquefaction cycle; multi-streams heat exchanger; Matlab; PROOSIS; AMESIM; ArianeGroup;

    Abstract : This paper presents the master thesis work done at ArianeGroup on the development and characterization of multi-streams heat exchangers for liquefaction cycle analysis in the context of hydrogen mobility. In 2015, the Paris Agreements aimed at strengthening the global response to the threat of climate change by keeping the temperature rise below 1. READ MORE

  3. 2. Validating results from the Molten Salt Reactor Experiment by use of turbulent CFD simulations : A study of a modified U-tube shell-and-tube primary heat exchanger and radiator with molten salts

    University essay from Luleå tekniska universitet/Rymdteknik

    Author : Malcolm Akner; [2021]
    Keywords : CFD; MSRE; CAD; CHT; experiment; molten; liquid; salt; fluid mechanics; mechanics; fluid; LTU; nuclear; reactor; nuclear reactor; generation four; generation IV; copenhagen atomics; copenhagen; atomics; space engineering; space; engineering; aerospace; thesis; master s thesis; master s; Malcolm; Akner; Erik; CFD; MSRE; CAD; CHT; flytande; salt; strömningslära; strömningsmekanik; fluid; fluidmekanik; LTU; kärnreaktor; generation fyra; generation IV; copenhagen atomics; rymdteknik; flygteknik; ingenjör; civilingenjör; examensarbete; Malcolm; Akner; Erik;

    Abstract : Background Nuclear reactors utilizing molten fuels rather than solid fuels show a massive advantage in energy yield, waste handling and safety features. The only successful reactor utilizing a molten fuel was called the ‘Molten Salt Reactor Experiment’ (MSRE), built and operated in the Oak Ridge national laboratory (ORNL) in Tennessee, U.S.A. READ MORE

  4. 3. Additively Manufactured Heat Exchangers- Development and Testing

    University essay from Lunds universitet/Innovation

    Author : Isak Wadsö; Simon Holmqvist; [2020]
    Keywords : Additive manufacturing; Heat exchanger; Triply periodic minimal surface; AlSi10Mg; Technology and Engineering;

    Abstract : Heat exchangers are important devices in many applications. Extensive work is done in optimization, but the overall designs are often one of the conventional varieties such as plate or shell-and-tube heat exchanger. These are constrained by their manufacturing, for example the use of construction material such as sheet metal and cylindrical pipes. READ MORE

  5. 4. Design and Optimization of a Sodium-Molten Salt Heat Exchanger for Concentrating Solar Power applications

    University essay from KTH/Skolan för industriell teknik och management (ITM)

    Author : Salvatore Guccione; [2020]
    Keywords : Concentrating solar power CSP ; liquid sodium; advanced molten salt; chloride salt; heat exchanger HX ; shell and tube; CSP Gen3 Liquid-Phase Pathway; Modelica; Termisk solkraft; CSP; flytande natrium; avancerat smält salt; kloridsalt; värmeväxlare HX ; skal och rör; CSP Gen3 Liquid-Phase Pathway; Modelica;

    Abstract : Concentrating Solar Power (CSP) is one of the most promising renewable energybased electricity generation technologies to deal with the increasing demand of power consumption and environmental sustainability. With the aim of achieving the 2020 SunShot cost target for CSP of 60 USD/MWh, the United States Department of Energy presented, in May 2018, the Gen3 CSP initiative. READ MORE

  6. 5. Systematic optimisation of an existing fuel oil preheating system : Facilitating replacement of 5000 cSt oil with 74 500 cSt

    University essay from Linnéuniversitetet/Institutionen för maskinteknik (MT)

    Author : Albin Fransson; Peter van der Brug; [2020]
    Keywords : Heat Exchanger; Shell; Tube; Plate; DFSS; Fuel Oil; Optimisation; Viscosity; Efficiency;

    Abstract : In order to increase the efficiency of a preheating system as temperatures increase, without using seawater as a coolant, an additional heat exchanger is required to be installed into the system. The purpose of the study is therefore to investigate how the temperatures of fuel oils can be increased while minimising the loss of energy and costs. READ MORE