Essays about: "slip connection"

Showing result 1 - 5 of 11 essays containing the words slip connection.

  1. 1. Effects of Dynamic Modeling on the Path Planning of Simulated Autonomous Vehicles

    University essay from Linköpings universitet/Fordonssystem; Linköpings universitet/Tekniska fakulteten

    Author : Elin Kidell Löwstedt; [2022]
    Keywords : ;

    Abstract : The purpose of the thesis was to evaluate the robustness of the Hybrid A* algorithm in regards to the levels of dynamic vehicle modeling, vehicle parameters and driving velocity. The original scope of the thesis project was to alter vehicle and tire models but this was discovered to be out of the time limits of the thesis project. READ MORE

  3. 2. Glued connection for TCC slabs : Experimental and Numerical investigation

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Ervin Halilovic; Seid Lotinac; [2022]
    Keywords : TCC connection; Composite element; Adhesive connection; Silicone Adhesive; Polyurethane Adhesive; Slip modulus; Shear stress; Cohesive elements; Traction seperation law; Mullins effect; Hysteresis;

    Abstract : Timber-concrete composite (TCC) structures are becoming more popular in several industrial applications as an efficient method for optimizing the structural performance and the cost of construction as well as lowering the emissions of carbon dioxide. TCC floors are more sustainable than pure concrete floors and more resistant to vibrations and excessive deflections than pure wooden floors. READ MORE

  4. 3. Strengthening of non-composite bridges by Partial Composite Action

    University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Author : Johan Tjernberg; [2022]
    Keywords : Composite action; Composite bridges; Partial shear connection; Partial Composite Action; Shear connectors; Coiled Spring Pins;

    Abstract : A common bridge type is the steel-concrete bridge where the concrete deck is built over steel girders. In many earlier designs the bridge type was often built as non-composite, which means that the concrete deck and the steel girder has no shear connection at the steel-concrete interface and therefore bend as individual components. READ MORE

  5. 4. Stability of building structures using NLFEA including second order effects : Applications with the software ATENA-GiD

    University essay from KTH/Betongbyggnad

    Author : Alexandros Petkoglou; [2021]
    Keywords : Non-linear analysis; second order effects; prefabricated buildings; ATENA; GiD; slip connection; Icke-linjär analys; andra ordnings effekter; förtillverkade byggnader; prefabricerade byggnader; ATENA; GiD; glidkoppling;

    Abstract : In Sweden, prefabrication in the construction industry is a very common system. In prefabricated structures, there are various kinds of connections and generally many hinged connections. Therefore, it is of high interest to study the behavior of the prefabricated buildings in relation to the connections. READ MORE

  6. 5. Experimental study on innovative connections for large span structural timber trusses

    University essay from KTH/Byggnadsmaterial

    Author : Petter Werner Åström; [2019]
    Keywords : Timber structure; timber joint; large span trusses; experimental study; structural timber; birch plywood; reinforcement screws;

    Abstract : Large span timber trusses are usually built with glulam. One problem with large span glulam trusses is that the connections needed to transfer the load between truss members are often complex and expensive. Another issue is transportation. READ MORE