Essays about: "Aramis"

Showing result 1 - 5 of 10 essays containing the word Aramis.

  1. 1. Experimental and numerical analysis of orthotropic deformations of wood using Finite Strain Theory (large deformations) and the Finite Element Method (FEM) in 2D

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Honghao Ren; [2021]
    Keywords : Orthotropic material; Largedeformation; Two-dimension; Non-linear elasticity;

    Abstract : This thesis involves the derivation of a constitutive model under large deformationtheory using Updated Lagrange method applied on an orthotropic material.Thefollowing aspects are included in this thesis work: introduction, theory, FEM implementation, derivation of constitutive model, calibration, result, discussion, conclusion and the future work. READ MORE

  3. 2. Tensile Strain Monitoring in Reinforced Concrete Using Non-Contact Full-Field Optical Deformation Measurement Systems

    University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Author : Jenny Lindmark; [2018]
    Keywords : Digital Image Correlation; Optical Monitoring; Reinforced Concrete; Tensile Strain;

    Abstract : As traffic loads increase and bridges age the need for structural health monitoring is growing. With the digitalization of our society, new non-contact full-field measurement techniques have been developed. These techniques have the potential to be used in monitoring of existing bridges. Today visual inspections are carried out every sixth year. READ MORE

  4. 3. Press Measurements and Virtual Rework of Stamping Dies

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Einar Palsson; Mårten Hansson; [2017]
    Keywords : Virtual Rework; Inverse Modeling; ARAMIS Digital Image Correlation DIC ;

    Abstract : Stamping dies are used in the Sheet Metal Forming (SMF) process for manufacturing of car body parts. The lead time for design and manufacturing of a stamping die is long, and therefore costly. READ MORE

  5. 4. Fracture prediction of stretched shear cut edges in sheets made of Dual-Phase steel

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Johannes Falk; [2017]
    Keywords : Strain; DP steel; Dual-phase steel; Autoform; Aramis; Fracture strain; Advanced High Strength Steels; AHSS; Fracture prediction;

    Abstract : Dual-Phase (DP) steels, part of the group of Advanced High Strength Steels (AHSS), are used by car manufactures due to its large strength to weight ratio. The high strength of the DP steel does have a negative impact on the formability during sheet metal forming and stretch forming, e.g. READ MORE

  6. 5. Material properties of concrete used in skewed concrete bridges

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Ahmad Saad; [2016]
    Keywords : crack; skew slab; RCC slabs; fracture process zone; uniaxial compression test; uniaxial tension test; Brazilian splitting tension test; modelling linear behavior of concrete; bridges.;

    Abstract : This thesis has discussed both properties and geometry of concrete slabs used in bridges. It gave understanding on behavior of concrete in both tension and compression zones and how crack propagates in specimens by presenting both theory of fracture and performing concrete tests like tension splitting, uniaxial compression and uniaxial tension tests. READ MORE