Essays about: "Selective Laser Melting SLM"
Showing result 11 - 15 of 22 essays containing the words Selective Laser Melting SLM.
-
11. Construction of a Heat Transfer Rig based on Energy Balance for Rapid Production of Correlations for Additively Manufactured Geometries
University essay from KTH/Skolan för industriell teknik och management (ITM)Abstract : This thesis has set the first milestones towards building a Nusselt number correlation that adapts to the current state of art designing and manufacturing processes at Siemens Industrial Turbomachinery AB, focusing on cooling mini-channels produced with Additive Manufacturing. Additive manufacturing (AM), also known as 3D printing, is a gamechanger technology that has revolutionised manufacture and design know-how, bringing down production cost, time and waste. READ MORE
-
12. Powder bed additive manufacturing using waste products from LKAB's pelletization process : A pre-study
University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikAbstract : This report is the result of a bachelor thesis project executed at Luleå University of Technology(LTU). The purpose of the project was to investigate the possibility to use the metal powder wasteproducts from LKAB’s pelletizing process for additive manufacturing as this would meaneconomic benefits for the sake of LKAB as well as environmental benefits. READ MORE
-
13. Alloy 718 manufactured by AM Selective Laser Melting : Evaluation of microstructure and weldability
University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikAbstract : Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, because of its excellent mechanical properties at high temperatures and its good weldability. This material has been extensively used and studied in cast and wrought forms during the past decades. READ MORE
-
14. Residual stresses and distortions in austenitic stainless steel 316L specimens manufactured by Selective Laser Melting
University essay from Högskolan Väst/Avdelningen för svetsteknologi (SV)Abstract : Residual stresses are one of the major challenges in additive manufacturing of metallic materials today. They are induced during manufacturing because of the rapid local heating and cooling and may cause distortions, cracking and delamination between layers. READ MORE
-
15. A Cost Breakdown and Production Uncertainty Analysis of Additive Manufacturing : A Study of Low-Volume Components Produced with Selective Laser Melting
University essay from Blekinge Tekniska Högskola/Institutionen för industriell ekonomiAbstract : Background: Additive manufacturing has recently gained cogency as a final part manufacturing technique. The method uses a layer-upon-layer technique to build three-dimensional objects. This technique has many advantages creating new opportunities regarding production. READ MORE