Essays about: "acceleration test rig"

Showing result 1 - 5 of 11 essays containing the words acceleration test rig.

  1. 1. Development and evaluation of concepts for a high acceleration test rig : Development of a test rig, which aims to expose components to large and controllable accelerations

    University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Author : Axel Jansson; [2023]
    Keywords : High acceleration; ballistics; acceleration test rig;

    Abstract : This thesis work is dedicated towards finding a feasible test rig design, which can expose small components, produced by SAAB, to a variety of accelerations under different conditions. A literature study is conducted with the objective of gathering information regarding high acceleration testing, where relevant components, designs and calculation methods are presented. READ MORE

  3. 2. Development and evaluation of concepts for a highacceleration test rig : Development of a test rig, which aims to investigate possibilities for controllable and securepressure build up

    University essay from Karlstads universitet

    Author : Fredrik Axelsson; [2023]
    Keywords : ;

    Abstract : Since the early 18th century, compressed air has been used as a variant of propellant to move objects.The technology was not very successful during that period, but in the 20th century, engineers beganexploring the possibilities of using compressed air to power tools and machines. READ MORE

  4. 3. Experimental Investigation of Fluid-added Parameters on a Kaplan Runner

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Malin Strandberg; [2021]
    Keywords : Added mass; added inertia; fluid dynamics; hydropower; Kaplan turbine; fluid-solid interaction;

    Abstract : In order to reach climate and environmental goals, Sweden is increasing the implementation of intermittent renewable energy sources such as wind and solar power to the electricity grid. The increase of intermittent energy sources is rising power regulation requirement towards hydropower, which increasingly exposes the hydraulic turbines to high loads and fluctuating hydraulic forces. READ MORE

  5. 4. Model of dynamic behavior for frame mounted truck components

    University essay from KTH/Hållfasthetslära (Inst.)

    Author : Erik Bäckström; [2019]
    Keywords : ;

    Abstract : In the truck industry, it is crustal to test components against fatigue to make sure that the trucks stand up to the high demands on durability. Today’s testing methods have some disadvantages; it is quite a time-consuming process, but more important, similar tested components cannot easily be compared due to the load spread the components are subjected to. READ MORE

  6. 5. Experimental Investigation of Added Mass and Damping on a Model Kaplan Turbine for Rotor Dynamic Analysis

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : Timmy Nyman; [2018]
    Keywords : Added mass; added damping; rotor dynamics; kaplan turbine; vibrations; fluid dynamics;

    Abstract : The concept of added hydrodynamic properties such as added mass is of importance in modern hydropower development, mainly for rotor dynamic calculations. Added mass could result in reduced natural frequencies and altered mode compared to existing simulation models. READ MORE