Essays about: "adhesion test"

Showing result 11 - 15 of 47 essays containing the words adhesion test.

  1. 11. Mechanical and tribological characterization of additive manufactured Co-alloyed tool steels aimed for cutting tool bodies

    University essay from Högskolan Dalarna/Institutionen för information och teknik

    Author : Jijesh Rajan; [2022]
    Keywords : Maraging steels; Selective laser melting; microstructure; wear; Modified 18Ni300; Osprey MAR;

    Abstract : A drill tool body operates under tough cutting conditions where it is subjected to severe rubbing at the drill flute margin by the sliding chips. The tool wear caused by the contact stresses of the high-speed sliding chips is one of the common damage mechanisms observed in drill tool bodies. READ MORE

  3. 12. Additive Manufacturing of Strain Gauges : A Study of the Feasibility of Printing Strain Gauges Using Inkjet Printing

    University essay from Uppsala universitet/Institutionen för materialvetenskap

    Author : Karin Wennersten; [2022]
    Keywords : Additive manufacturing; strain gauge; inkjet; IJP; AJP; aerosol jet;

    Abstract : Additive manufacturing (AM) also commonly known as 3D-printing is a manufacturing method which creates parts from adding layer into another. In the field of printed electronics Inkjet printing (IJP) and Aerosol Jet printing (AJP) are the most common AM techniques. READ MORE

  4. 13. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy

    University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Author : Oskar Lundquist; [2022]
    Keywords : CVD diamond coating; CVD; Aluminum machining; Tool coatings; PCD; diamond coating; diamond; Tribology; Material Science.;

    Abstract : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. READ MORE

  5. 14. Investigating the influence of moisture and temperature on adhesion and barrier properties in laminates

    University essay from Lunds universitet/Förpackningslogistik

    Author : Ramyashree Srinath; [2021]
    Keywords : sustainable packaging materials; temperature; moisture; adhesion; barrier properties; Technology and Engineering;

    Abstract : A world leading food processing and packaging company, Tetra Pak works with the vision of ‘Protect what’s good’ and aims to be a pioneer in developing sustainable packaging. Tetra Pak offers a wide range of carton packaging out of which aseptic carton packages are the most common. READ MORE

  6. 15. Mechanical and tribological characterization of additivemanufactured Co-free tool steels aimed for cutting tool bodies

    University essay from Högskolan Dalarna/Institutionen för information och teknik

    Author : Mayur Mane; [2021]
    Keywords : Co-free maraging steels; Co-free W360 AMPO alloy; hot-work tool steel; Selective laser melting; microstructure; wear;

    Abstract : Additive manufacturing (AM) is an emerging and interesting technology that enables some of theproduct development projects (PDPs) to produce products that have mechanical and tribologicalproperties comparable to products that are conventionally manufactured. Selective laser melting(SLM) is an additive manufacturing technology that is predominantly used for the production of metalbased components (i. READ MORE