Essays about: "modelling abaqus"

Showing result 21 - 25 of 61 essays containing the words modelling abaqus.

  1. 21. Study of delamination of composite hat skin stringer interface failure

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Rajkumar Rajamanickam; [2019]
    Keywords : Delamination; Cohesive Zone Model; Skin-Stringer; Composite modelling; ABAQUS; Interface failure;

    Abstract : The use of composite materials brought a tremendous breakthrough in the scientific world of aerospace engineering. The lack of understanding of the failure of composite materials can be disastrous. Composite laminated structures need to be thoroughly studied and investigated in the design stage. READ MORE

  3. 22. Nonlinear Modelling and Simulation of Impact Events and Validation with Experimental Test

    University essay from KTH/Lättkonstruktioner

    Author : András Péter Székely; Nicole Al Hanna; [2019]
    Keywords : ;

    Abstract : For rattle event prediction accurate models capable of estimating system response at impact are required. In this thesis, a finite element model is built to imitate a physical setup designed for testing rattle. First, a modal analysis is performed in ABAQUS/Standard to validate the CAE model. READ MORE

  4. 23. Developing a Virtual Consumer: From Human Skin to FE Modelling

    University essay from Lunds universitet/Avdelningen för Biomedicinsk teknik

    Author : Viktor Hultgren; Gustaf Svanberg; [2019]
    Keywords : FEM; Skin; Dermis; Motion Capture; Technology and Engineering;

    Abstract : In the 'on-the-go' society of today, the use of single unit beverage packages has increased. Consequently, the interaction between the consumer and the package have also attracted greater interest when trying to gain advantages in a competitive market. READ MORE

  5. 24. Parameterized Modelling of Global Structural Behaviour of Modular Based Two Storey Timber Structure

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Daudi Salezi Augustino; Bernard Adjei Antwi-Afari; [2018]
    Keywords : Modular-based timber structure; FE-simulations; parameterized modelling; spring stiffness; friction; angle brackets and uplift plates;

    Abstract : The global stiffness behaviour of modular-based two storey timber structures was studied under prescribed horizontal displacements at the upper corners of the volume modules. To be able to study this behaviour, a numerical finite element model was created in Abaqus. READ MORE

  6. 25. Study of the Bonding Properties for Timber – Glass Composite Beams : The influence of viscoelastic adhesives on the load-bearing capacity

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Omid Mohammadianfar; Lambert Imanizabayo; [2018]
    Keywords : Glass-timber composite beams; long-term behavior; viscoelastic bondline; Numerical simulations finite element analysis ; Analytical solution Gamma method ;

    Abstract : The study of the influence of viscoelastic adhesives on timber-glass composite beams addresses the development of new and innovative load bearing structures. Hybrid timber-glass beams, comprising of timber flanges and a glass web, were considered. READ MORE