Essays about: "resin impregnated paper"

Found 4 essays containing the words resin impregnated paper.

  1. 1. Simulation of the Filling of Epoxy in Resin Impregnated Paper Bushings : Analysis of Temperature Measurements during Filling of Epoxy and the Generation of New Filling Recipes to Avoid Cavities in the RIP Bushing

    University essay from Uppsala universitet/Avdelningen för beräkningsvetenskap

    Author : Hanna Damsgaard Falck; [2023]
    Keywords : Porous media; COMSOL Multiphysicis; Darcy s Law; Richard s Equation; Resin Impregnated Paper Bushings; RIP Bushings; Bushings; Transformers; Epoxy; Simulation;

    Abstract : The goal of the project was to create a model in COMSOL Multiphysics that can simulate thefilling of resin (epoxy) in Resin Impregnated Paper (RIP) bushings. Using the model new fillingrecipes that avoid problematic double-fronts and thereby avoid the creation of cavities in thebushings should be designed. READ MORE

  3. 2. Analysis of Resin Impregnated Non-woven : In collaboration with Hitachi Energy

    University essay from Uppsala universitet/Institutionen för materialvetenskap

    Author : Ahmed Abdulkareem Najm Al-Saedi; Anders Hedenfeldt; Andrea García; Anna-Karin Kron; Cornelia Bergström; Lova Källkvist; [2022]
    Keywords : resin impregnated non-woven; bushings; composite; resin impregnated paper; tensile; bending; permeability; mechanical properties;

    Abstract : High voltage bushings are the most critical components of power transformers. A common material used in bushings is resin impregnated paper (RIP). Hitachi Energy is investigating whether this can be replaced with a new material, resin impregnated non-woven (RIN). READ MORE

  4. 3. Development of Robust Automated Handling of pre-impregnated Carbon Fibre

    University essay from Linköpings universitet/Industriell Produktion

    Author : Fredrik Martinsson; [2018]
    Keywords : Composite Automation; Automated CFRP Layup; Prepreg; Pick and Place;

    Abstract : Prepreg is a fibre reinforced polymer composite material often used by the aeronautical industry. The material supplier has pre-impregnated the fibre often with an epoxy resin and cured it to a semi-viscous B-stage where the material is tacky (adhesive). READ MORE

  5. 4. A Finite Model of Bi-Stable Woven Composite Tape-Springs

    University essay from KTH/Mekanik

    Author : Yoann Prigent; [2011]
    Keywords : ;

    Abstract : The recent development of CubeSat nano-satellites shows that it is an effective way to send a payload onto orbit, as it is a relatively inexpensive and quick access to space. If the small size of these satellites is their main advantage, it is also the principal source of problems when it comes to designing it. READ MORE