Essays about: "setpoint"
Showing result 16 - 20 of 27 essays containing the word setpoint.
-
16. Sensitivity and Uncertainty Analysis of Building Parameters integrating energy, daylight and thermal comfort
University essay from Lunds universitet/Avdelningen för Energi och byggnadsdesign; Lunds universitet/Institutionen för arkitektur och byggd miljöAbstract : The objective of this thesis was to perform multidisciplinary sensitivity and uncertainty analysis of the building parameters integrating thermal comfort, energy and daylight. The case study of a Danish office building was used for performing the simulations. READ MORE
-
17. Anammox in IFAS reactor for reject water treatment
University essay from KTH/Hållbar utveckling, miljövetenskap och teknikAbstract : The aim of this study was to evaluate the performance of the integrated fixed-film activated sludge (IFAS) reactor achieving partial nitritation/anammox process to treat reject water after dewatering of digested sludge. During the study period, dissolved oxygen setpoint, aeration mode and inflow loading were changed to evaluate their influence on the process performance and efficiency in the reactor. READ MORE
-
18. Speed Control of Large Sea Going Vessels
University essay from KTH/Skolan för elektroteknik och datavetenskap (EECS)Abstract : For a ship sailing between destinations on a schedule, having a speed controllerthat can sail the ship according to a speed reference oers extended capabilitiesfor the crew. It is also a necessary tool for sailing the ship, according to anoptimally planned speed reference. READ MORE
-
19. Importance of atomic force microscopy settings for measuring the diameter of carbon nanotubes
University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)Abstract : Carbon nanotubes (CNTs) have gathered a lot of interest because of their extraordinary mechanical, electrical and thermal properties and have potential applications in a wide variety of areas such as material-reinforcement and nano-electronics. The properties of nanotubes are dependent on their diameter and methods for determining this using atomic force microscopy (AFM) in tapping mode assume that the measured height of the tubes represent the real diameter. READ MORE
-
20. Principles for tuning heat zone controllers in a belt furnace through modeling and simulation
University essay from Lunds universitet/Institutionen för reglerteknikAbstract : In this thesis the heating area of a belt furnace for annealing metal powder has been modeled. The model was extended with PI-controllers for controlling the energy added to the model. It was simulated with differently tuned controllers to test tuning principles for finding suitable control parameters for the process. READ MORE