Essays about: "MODDE"

Showing result 11 - 15 of 27 essays containing the word MODDE.

  1. 11. Factors affecting the Relative Crease Strength of paperboard

    University essay from Lunds universitet/Hållfasthetslära

    Author : Oskar Smedman; [2017]
    Keywords : paperboard; paper mechanics; creasing; solid mechanics; design of experiments; simulation; Technology and Engineering;

    Abstract : Paperboard is frequently used as a base material in packages. There is folding involved in the conversion process, where a package is formed from a paperboard sheet. However, because direct folding causes undesirable effects such as wrinkles, it must first be creased. READ MORE

  3. 12. Två-fas extraktion av polyfenoler från blåbär

    University essay from SLU/Department of Forest Biomaterials and Technology (from 131204)

    Author : Simon Vikström; [2017]
    Keywords : blåbär; polyfenol; antocyanin; två-fas extration; RBR; natriumfosfat; ammoniumsulfat;

    Abstract : I de svenska skogarna produceras det varje år ca 250 000 ton blåbär och av det tillvaratas endast ca 7 %. Blåbär innehåller höga halter av antocyanin vilket är väldigt attraktivt på hälsokostmarknaden. READ MORE

  4. 13. Innovative Control Strategies for the Partial Nitritation/Anammox Wastewater Treatment Process

    University essay from KTH/Energiteknik

    Author : Evan Scott; [2016]
    Keywords : ;

    Abstract : The project undertaken in this thesis was proposed by IVL Swedish Environmental Research Institute and performed at their R&D facility Hammarby Sjöstadsverk as a part of the EU funded research project R3 Water. A single stage partial nitritation/Anammox system in a moving bed biofilm reactor (MBBR) was controlled using oxidation reduction potential (ORP) in order to evaluate its utility as control parameter. READ MORE

  5. 14. Design of Experiment for Laser cutting in Superalloy Haynes 282

    University essay from Karlstads universitet/Science, Mathematics and Engineering Education Research (SMEER)

    Author : Malin Rådberg; [2016]
    Keywords : DOE; laser cutting; Haynes 282; superalloy; nitrogen; argon;

    Abstract : This project aims to investigate the effect of varying different laser cutting parameters on the laser cut surface. The parameters that were varied were cutting speed, beam effect, gas pressure and focal point. READ MORE

  6. 15. Investigation and optimization of elution buffer effects on the elution profile for the cation exchange chromatography resin POROS XS : In association with Cobra Biologics

    University essay from KTH/Skolan för bioteknologi (BIO)

    Author : Heidi Lemström; [2016]
    Keywords : ;

    Abstract : The goal of this project was to investigate how elution buffer properties affectthe protein elution in the polishing purification step with a cation exchange chromatographyconsisting of POROS XS resin. Hence be able to better predict thebehavior of the resin, two model proteins were used for this investigation (K100and Y102). READ MORE