Advanced search

Showing result 1 - 5 of 8 essays matching the above criteria.

1. 1. Effect of Heat Treatment on the Microstructure and Hardness Property of Additively Manufactured Ti6Al-4V and Ti-6Al-4V-4.5wt.%316L Componentsfor Biomedical Applications.

   University essay from Uppsala universitet/Institutionen för materialvetenskap

   Author : Moyosore Babatomide Fakoya; [2023]
   Keywords : ;

   Abstract : AbstractThe continuous advancement of medical implants technology presents exciting possibilities.Laser Powder Bed Fusion (L-PBF) additive manufactured Ti-6Al-4V alloy implants showtremendous promise as they offer the potential for highly personalized implants, improved implantfunctionality and enhanced long-term outcomes. READ MORE

3. 2. Optimization of the process-route of a Nickel-base alloy : Investigation of Sigma-phase precipitation in heat treatment

   University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

   Author : Felix Andersson; [2023]
   Keywords : Sigma-phase; austenitic stainless steel; Nickel-base alloy; heat treatment; Sigmafas; austenitiskt rostfritt stål; Nickelbas legering; värmebehandling;

   Abstract : The focus of this master’s thesis is on the heat treatment of Ni-base alloys, specifically the risk of intermetallic σ-phases during different stages of heat treatment. The alloy studied is Sanicro®28, a super-austenitic stainless steel produced by Alleima AB. READ MORE

4. 3. Dissolution of Cored Wire in Steel Melt : Optimization of Feeding Rate

   University essay from KTH/Materialvetenskap

   Author : Hagen Christian Hagens; [2022]
   Keywords : Cored wire injection · light alloy addition · feed rate optimization · inclusions modification · finite difference method;

   Abstract : Calcium treatment is an established operation in the production of steels. Most importantly, it serves to modify detrimental inclusions in the melt for improved castability and superior product properties. Due to calcium’s low melting point and high vapour pressure, its addition to liquid steel is challenging and yields are generally low. READ MORE

5. 4. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy

   University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

   Author : Oskar Lundquist; [2022]
   Keywords : CVD diamond coating; CVD; Aluminum machining; Tool coatings; PCD; diamond coating; diamond; Tribology; Material Science.;

   Abstract : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. READ MORE

6. 5. Design of cemented carbide with Ni-based superalloy binder strengthened with y’-Ni3Al precipitates

   University essay from KTH/Materialvetenskap

   Author : Oscar Edholm; [2018]
   Keywords : Cemented Carbide; Super alloy; Ni-alloy; Ni-Super alloy; Superalloy; Ni3Al; NiAl; Gamma Prime; Gamma; Precipitates; Ni3Al Precipitates; Master Alloy; Liquid Phase Sintering; Cementerad karbid; Hårdmetall; Superlegering; Ni-legering; Ni-Superlegering; Superalloy; Ni3Al; NiAl; Gamma Prim; Gamma; Precipitates; Ni3Al Precipitates; Mästerlegering; Utfällning;

   Abstract : Replacement of cobalt in cemented carbides has gained in attention recently because threats of regulations due to health issues (cancerogenic effect), increased demand from the electric vehicle industry and the questionable extraction from countries like Democratic Republic of Congo. In this report the use of Ni-based binder as an alternative binder for cemented carbides has been explored. READ MORE