Essays about: "beam theory analysis"

Showing result 11 - 15 of 33 essays containing the words beam theory analysis.

  1. 11. Loosely coupled, modular framework for linear static aeroelastic analyses

    University essay from KTH/Lättkonstruktioner

    Author : Aaron Dettmann; [2019]
    Keywords : Aeroelasticity; Simulation; CFD; FEM; VLM; Euler-Bernoulli beam theory III; Aeroelasticitet; Simulation; CFD; FEM; VLM; Euler-Bernoulli-balkmodell;

    Abstract : A computational framework for linear static aeroelastic analyses is presented. The overall aeroelasticity model is applicable to conceptual aircraft design studies and other low-fidelity aero-structural analyses. A partitioned approach is used, i. e. READ MORE

  3. 12. Safety formats for non-linear finite element analyses of reinforced concrete beams loaded to shear failure

    University essay from KTH/Betongbyggnad

    Author : Anton Ekesiöö; Andreas Ekhamre; [2018]
    Keywords : nonlinear finite element analysis; estimation of coefficient of variation; par- tial factor; model uncertainty; deep beams; shear;

    Abstract : There exists several different methods that can be used to implement a level of safety when performing non-linear finite element analysis of a structure. These methods are called safety formats and they estimate safety by different means and formulas which are partly discussed further in this thesis. READ MORE

  4. 13. Effects of Lattice Strain in Silicon Double Crystal Monochromators

    University essay from Lunds universitet/Fysiska institutionen; Lunds universitet/MAX IV-laboratoriet

    Author : Johan Eckdahl; [2018]
    Keywords : synchrotron radiation physics max iv maxiv monochromator monochromation; Physics and Astronomy;

    Abstract : Silicon double crystal monochromators are standard in modern synchrotron hard X-ray beamlines. Their role is reducing a polychromatic photon beam to a small range of wavelengths, typically within a bandwidth of 0.01-0.1%. READ MORE

  5. 14. Development of Crane for Additive Manufacturing

    University essay from Lunds universitet/Innovation

    Author : Lazar Milovic; [2018]
    Keywords : Additive Manufacturing; Construction; Robotics; Machine Design; Heavy Industry; Technology and Engineering;

    Abstract : Increased popularity of additive manufacturing has pushed the method into new areas where it has not been used before, such as construction. Buildings are being 3D printed by various companies around the world, but the application of additive manufacturing in construction is still in its early stages. READ MORE

  6. 15. Investigation of Wide Band mm-Wave Radome

    University essay from KTH/Elektroteknisk teori och konstruktion

    Author : Shreyasi Bhowmik; [2017]
    Keywords : ;

    Abstract : “Radome” is a necessary shield for any type of antenna. Itsshape, thickness, mechanical and electrical properties defineits application. This thesis mainly revolves around thetechniques, used for radome analysis in W-band with thehelp of electromagnetic solvers of High Frequency StructureSimulator (HFSS) and CST Microwave Studio. READ MORE