Essays about: "micro turbine"

Showing result 11 - 15 of 30 essays containing the words micro turbine.

  1. 11. A study of micro- and surface structures of additive manufactured selective laser melted nickel based superalloys

    University essay from KTH/Materialvetenskap

    Author : Emil Strand; Alexander Wärnheim; [2016]
    Keywords : additive manufacturing; selective laser melting; microstructure; surface roughness; superalloy;

    Abstract : This study examined the micro- and surface structures of objects manufactured by selective laser melting (SLM). The results show that the surface roughness in additively manufactured objects is strongly dependent on the geometry of the built part whereas the microstructure is largely unaffected. READ MORE

  3. 12. Feasibility study of Gisuma micro-hydropower plant (Rwanda)

    University essay from Högskolan i Gävle/Avdelningen för bygg- energi- och miljöteknik

    Author : Leonidas Nzirorera; J. Pierre Shumbosho; [2015]
    Keywords : ;

    Abstract : Nowadays; Rwanda is one of the country which is under developing country and one of the strategy to be used is to explore and develop the sector of energy in Rwanda. Our country Rwanda needs to develop the rural electrification sectors in order to provide illumination to the population living in those rural  areas for rapid development in different sectors like schools; health centers; business centers; administrative officers. READ MORE

  4. 13. OFFSHORE WIND RESOURCE ASSESSMENT, SITE SUITABILITY AND TECHNOLOGY SELECTION FOR BLIGH WATERS FIJI USING WINDPRO

    University essay from Uppsala universitet/Institutionen för geovetenskaper

    Author : Kunal Kushal Dayal; [2015]
    Keywords : Fiji; offshore wind resource assessment; site suitability; technology and economics;

    Abstract : This thesis aims to carry out offshore wind resource assessment, site suitability and technology selection for Bligh Waters in Fiji, and perform energy calculations for a 10-12 MW model offshore wind farm as well as carry out a simple economic analysis. The objectives were achieved by assessing the offshore wind resources employing atmospheric reanalysis data from the WindPRO online database performing the data correlation using the Measure Correlate Predict (MCP) module of WindPRO. READ MORE

  5. 14. Volumetric Solar Receiver for a Parabolic Dish and Micro-Gas Turbine system : Design, modelling and validation using Multi-Objective Optimization

    University essay from KTH/Kraft- och värmeteknologi

    Author : Roberta Mancini; [2015]
    Keywords : volumetric receiver; parabolic dish; OMSoP; micro-gas turbine; multi-objective optimization; ray tracing;

    Abstract : Concentrated Solar Power (CSP) constitutes one suitable solution for exploiting solar resources for power generation. In this context, parabolic dish systems concentrate the solar radiation onto a point focusing receiver for small-scale power production. READ MORE

  6. 15. 3D Printing as an Alternative ManufacturingMethod for the Micro gas Turbine Heat Exchanger

    University essay from KTH/Kraft- och värmeteknologi

    Author : Sherry Zhang; Wolfgang Seiya; [2015]
    Keywords : ;

    Abstract : A variety of materials for high temperature applications were studied. Best materials forconstructing heat exchangers were selected using models based on preferential weights. Currentadditive manufacturing techniques and industries were also studied and rated to determine thebest materialprintingtechniquecombination. READ MORE