Lubricants for Hot Stamping of Aluminum: Evaluation of Tribological Behavior and Cleanability

Abstract: Working at elevated temperature has its challenges due to the high level of complexity whenthe tribosystems operate under harsh conditions, commonly resulting in an increase on thefriction and thermal softening that goes into severe adhesion, severe abrasion and materialtransfer. Despite considerable research, there is a lack of research on tribology applied to hightemperature processes.  The aim of this project is to understand the tribological behavior of tool steel sliding againstaluminum under lubrication conditions working at high temperature. Salt-based, graphite-based, and polymer-based lubricants were evaluated as they are commonly used for aluminum forming. The cleanability of the lubricants after being subjected to elevated temperatures is also studied. High temperature tribological tests were carried out in a reciprocating sliding flat-on-flat configuration for 15 seconds. Optical microscope, SEM and EDS were performed to analyze the specimens after the tribological tests. Then a cleanability study was done to evaluate the cleanability of the lubricants and the effect of temperature on the cleanability of the lubricant. The concentration of the lubricants played an important role in the lubricant’s friction stability and dispersion, particularly for the polymer-based and graphite-based lubricants. Under the tested conditions the salt-based lubricant was ineffective as it showed high and unstable friction. The 10 wt.% polymer-based lubricant concentration presented severe adhesion and material transfer from the aluminum onto the tool steel.  The effect of temperature on the cleanability of the lubricants was correlated to the temperature in which the lubricants start to degrade. Nevertheless, the best cleanability was achieved when using ethanol as a cleaning agent in combination with high pressure spraying, and wirebrush techniques. Mild and high alkaline agents had poor cleanability abilities resulting insurface damage and corrosion on the tool steel.